Humidity transmitters

The Dwyer RHP-E series is a combined room temperature and humidity sensor for wall mounting. There can be chosen from different accuracies and a housing with or without display. There are several outputs that allow the sensor to be read on any type of GBS.

The Dwyer WHT series humidity transmitters measure temperature and relative humidity in the outside. The waterproof housing and sintered filter protect the sensor from weather effects. The WHT series is available with an analogue output for relative humidity and optionally also temperature.

The Kimo HM110 series is a transmitter with or without display. The HM110 is ideal to use as humidity measurement in air ducts and rooms for connection to a building management system. The installation is very easy and the housing can be mounted in two parts making it ideal for installers.

The Kimo TH110 series is a relative humidity transmitter with or without display. The TH110 is ideal to use as humidity and temperature measurement in rooms and air ducts for connection to a building management system. The installation is very easy and the housing can be mounted in two parts making it ideal for installers.

The Kimo TH210 series is a relative humidity transmitter with or without display. The TH210 is ideal to use as temperature and humidity measurement in air ducts and rooms for connection to a building management system. The transmitter calculates the absolute humidity, dew point, wet and dry bulb temperature. For temperatures up to 180°C stainless steel sensors are available. There are also seve...

The new C310 series are multifonctional transmitters which can be extended by an internal pressure module and two external probes. The display can show up to 4 parameters, but can also display a trend graph and the min/max values of each channel. The C310 has two analog outputs, which can be extended by two more. Modbus and Ethernet communication are available as an option.

The Dwyer RHP-D series has a combined temperature and humidity sensor for installation in air ducts. There can be selected from different precision and a performance with or without display. There are several outputs that allow the sensor to be read on any type of BMS.

De Produal KLH100 serie transmitters zijn ontworpen voor het detecteren en regelen van luchtvochtigheid en temperatuur in ruimtes. De transmitter kan bijvoorbeeld voor vraaggestuurde ventilatie worden gebruikt. De meetwaarden van de temperatuur en relatieve vochtigheid scrollen op de uitvoering met display. De gewenste waarde kan permanent worden getoond in plaats van de meetwaardes. De KLH100...

Met de RHRS serie weerhut voor luchtvochtigheidssensoren voorkomt u directe invloed van regen en zonlicht op de meting. De RHRS is er in een uitvoering met 6 of 10 lamellen. De weerhut wordt geleverd exclusief luchtvochtigheidssensor. De RHRS is geschikt voor verschillende modellen sensoren. De handige montage beugel maakt de de weerhut geschikt voor wandmontage of montage op buizen van 3/4 tot...

For cleanrooms, conditioned rooms and industrial ventilation applications where accurate measurement, control and monitoring of air parameters are critical, Sauermann's Si-C320 transmitters provide reliable measurements and help you meet the most stringent regulations.