Dwyer Instruments
Search results: 1-48 of 88
Dwyer differential pressure transmitter series DM-2000
| SKU | DM-2000 |
The Dwyer series DM-2000 differential pressure transmitter senses the pressure of air and compatible gases and sends a standard 4-20 mA output signal. The DM-2000 housing is specifically designed to mount in the same diameter cutout as a standard Magnehelic gage. A wide range of models are available factory calibrated to specific ranges. Pressure connections are inherent to the glass filled plast…
Dwyer MagneSense differential pressure transmitter series MS
| SKU | MS |
The Series MS Magnesense Differential Pressure Transmitter is an extremely versatile transmitter for monitoring pressure and air velocity. This compact package is loaded with features such as: field selectable english or metric ranges, field upgradeable LCD display, adjustable dampening of output signal (with optional display) and ability to select a square root output for use with pitot tubes an…
Dwyer smart air hood balometer series SAH
| SKU | W-9000383 |
The Dwyer SAH Smart Air Hood is a revolution in the field of balometers. The patented design ensures minimal resistance and the balometer is pre-calibrated for each type of grid. This makes the SAH the most reliable balometer on the market. The hood can easily be clamped between the floor and the ceiling with the included telescopic rod. The readout device communicates wirelessly with the hood up…
Dwyer Modbus and BACnet CO2, temperature and RV transmitter series CDTA
| SKU | CDTA |
The Dwyer CDTA series carbon dioxide meter combines three measurements in one compact housing. The CDTA measures CO2, humidity and temperature, but can also be used as a set point generator. Communication with a GBS or PLC is via Modbus®, or BACnet, which can be chosen in the field. To facilitate installation, the RS485 address can be set using dip switches. The CDTA uses a non-dispersive infrare…
Dwyer temperature transmitter for wall mounting series BTT-E
| SKU | BTT-E |
The Dwyer BTT-E series is a simple space temperature transmitter for wall mounting. For the analogue output, you can choose between 4-20 mA and 0-10 V, so that the transmitters can be connected to any BMS.
VOC-transmitter voor kanaalmontage serie CDTV
| SKU | CDTV |
De CDTV Kooldioxide en VOC-transmitters (vluchtige organische stoffen) verlaagt de energiekosten in gebouwen door de hoeveelheid geconditioneerde lucht te verlagen op basis van het gebruik van de ruimte. Door zowel CO2 als VOC te detecteren, kan de CDTV dampen detecteren die mogelijk moeten worden afgezogen voor een beter binnenklimaat.
Dwyer handheld digital manometer series 477AV
| SKU | W-9000017 |
Series 477 handheld digital manometers are packed with features you need to make pressure measurement and recording faster, easier and more accurate than ever. You can instantly select from up to nine of the most widely used pressure units. A non-volatile memory function enables storage of up to 40 readings. Other main features are: display HOLD, audible alarm, visual alarm, backlight with auto…
Dwyer digital manometer series 490A
| SKU | W-9000019 |
Series 490A Digital Manometers are versatile, hand-held, battery operated manometers available in several basic ranges for positive or positive differential pressure measurement and can tolerate most liquid media compatible with 316LSS. A memory function allows storage of up to 40 readings.
Dwyer CO2 transmitters series CDT
| SKU | W-9000392 |
The Dwyer CDT series CO2 transmitters are equipped with an NDIR (infrared) sensor. The transmitters are available in a wall-mounted version and in a version for duct mounting. Optionally, the transmitters are also available with a temperature output and SPST relay contact. Unique for this CO2 measurement is that it can also be used for rooms that are used 24 hours a day. Other sensors use the per…
Dwyer explosion proof differential pressure gauge series AT22000
| SKU | AT22000 |
With the explosion-proof AT22000 series, the popular Magnehelic® differential pressure manometer is now also available in a flame proof ATEX housing. This manometer measures underpressure, overpressure, or pressure difference. Popular applications are filter monitoring, room pressure monitoring and flow monitoring of a fan.
Dwyer ATEX differential pressure transmitter series AT2MS
| SKU | AT2MS |
The ATEX-certified AT2MS series Magnesense® differential pressure transmitter is an extremely versatile transmitter for monitoring pressure and air velocity in potentially hazardous areas. The AT2MS transmitter can be set up in English or metric ranges and can be extended with an LCD screen. A square root output can be set for use with pitot tubes and similar flow sensors. The flameproof ATEX hou…
Dwyer ATEX differential pressure controller series AT2DH3
| SKU | AT2DH3 |
The ATEX certified AT2DH3 series Digihelic® differential pressure controller is a 3-in-1 instrument that consists of a digital differential pressure gauge, relay contacts for alarms, or on-off control and a transmitter output. The AT2DH3 can also be used to measure air velocities and flow in combination with a pitot tube. The AT2DH3 has an analogue 4-20 mA output and two SPDT relay contacts with…
Dwyer ATEX approved differential pessure switch series AT1ADPS
| SKU | AT1ADPS |
The ATEX approved AT1ADPS differential pressure switch is designed for overpressure, underpressure and differential pressure applications in potentially hazardous areas. The large adjustment knob with scale makes it very easy to set the switching point. The AT1ADPS differential pressure switch is available in different switching ranges between 20 and 4000 Pa. The aluminum flame proof ATEX housing…
Dwyer broken bag detection particle transmitters series PMT2
| SKU | W-9000428 |
The Dwyer PMT2 series is a particle transmitter designed for broken bag detection (fiter leak detection). The special electrostatic induction technology detects particles that flow past the sensor and converts this into a 4 to 20 mA signal based on the concentration of these particles. The PMT2 offers 6 sensitivity ranges that allow the user to choose the range that best fits the application. The…
Dwyer CO2 transmitter for industry, animal husbandry and greenhouses series CDWP
| SKU | CDWP |
The Dwyer CDWP series consists of inductive CO2 transmitters for, for example, livestock farming (chicken barns), technical areas, monitoring of CO2 cooling systems and greenhouses. The CDWP measures the carbon dioxide content with an infrared (NDIR) measuring cell with a long lifespan. This sensor technology offers the highest accuracy compared to automatic baseline correction (ABC logic), which…
Luchtvochtigheidtransmitter met externe sensor serie RH-R
| SKU | RH-R |
De RH-R serie luchtvochtigheidstransmitters zijn geschikt voor toepassingen waarbij de ruimte beperkt is. De compacte sensor wordt beschermd door een verwijderbaar filter. De sensor kan tot wel 5 meter van de weerbestendige basis worden gemonteerd. De RH-R is ideaal voor klimaatkamers of montage in kanelen en luchtbehandelingskasten.
Dwyer Magnesense differential pressure transmitter series MSX Pro
| SKU | MSX Pro |
The Dwyer Magnesense Series MSX Pro differential pressure transmitter is the professional differential pressure transmitter that meets rigorous industry standards with innovative product design. The instrument has exceptional stability for use in critical building applications with the versatility of our original series Magnesense transmitters. Pressure ranges in Pa, mmH2O, and inWC are available…
Dwyer air velocity transmitter for low velocities series AVLV
| SKU | AVLV |
The Dwyer AVLV series is an air velocity transmitter for very low velocities below 2 m/s. The AVLV has universal inputs for monitoring equipment and the output range can be configured by local DIP switches. Process values can be monitored locally through the optional integral display or the portable remote display tool. The air velocity transmitter is suitable for quality intensive environments s…
Dwyer Critical room pressure monitor series RPMC
| SKU | RPMC |
The Dwyer pressure monitor series RPMC is designed for critical applications with low differential pressures. The transmitter uses a capacitive pressure sensor to achieve extremely high accuracy. There is a choice between ± 0.25% or ± 0.5% RSS. The RPMC has the same dimensions as the Magnehelic which simplifies an upgrade in the field. The pressure monitor is suitable for applications requiring s…
Dwyer Room status monitor series RSME
| SKU | RSME |
The Dwyer pressure monitor series RPMC is designed for critical applications with low differential pressures which must also be directly visible locally. The 4.3” full color touchscreen can be configured to measure positive or negative pressure in, for example, cleanrooms, hospitals, isolation rooms and laboratories. The Dwyer RSME Room Status Monitor is a complete solution featuring a touchscree…
Dwyer Room pressure monitor series RPME
| SKU | RPME FlexiSense |
The Dwyer pressure monitor series RPME is designed for critical applications with low differential pressures. The transmitter uses a piezo pressure sensor to achieve high accuracy. There is a choice between ±0.5% or ±1% RSS. The RPME has the same dimensions as the Magnehelic which simplifies an upgrade in the field. The pressure monitor is suitable for applications requiring strict pressure monit…
Dwyer Room status monitor series RSMC StabiliSense
| SKU | RSMC StabiliSense |
The Dwyer RSMC Room Status Monitor Series is designed for critical applications with low differential pressures that also require immediate local visibility. The 4.3” full color touchscreen can be configured to measure positive or negative pressure in, for example, cleanrooms, hospitals, isolation rooms and laboratories. The Dwyer RSME Room Status Monitor is a complete solution with a touchscreen…
Dwyer aan-uit of PID temperatuurregelaar serie 4C
| SKU | 4C |
De Serie 4C 1/4 DIN Temperatuurregelaar: Eenvoudige installatie, nauwkeurige PID-regeling, diverse uitgangen en configureerbare alarmen. Ideaal voor ovens, koelers en meer.
Dwyer ATEX/IECEx Differential Pressure Controller Series AT-DHC
| SKU | ATDHC |
The Dwyer Series AT-DHC is the successor to the well-known AT2DH3 differential pressure controller. This new generatio…
Dwyer Series PBLT2 submersible level transmitter for liquids
| SKU | 2029314 |
The Dwyer Series PBLT2 is a robust level transmitter for measuring liquid levels in water, wastewater, and slurries. T…
Dwyer electromagnetic flow meter series IEF
| SKU | IEF |
The Dwyer IEF series electromagnetic flow transmitter is an adjustable flow meter with electromagnetic technology that accurately and reliably measures a fluid velocity. The IEF series is specifically designed to deliver superior performance in combination with easy installation and use. The IEF flow meter is adjustable for pipe sizes from 100 to 900 mm and offers various output signals, includin…
Dwyer flow meter series VF Visi-Float
| SKU | VF |
The Dwyer Flow Meter Series VF Visi-Float is a compact and reliable solution, ideal for measuring air, water, and other compatible liquids or gases. Made from high-quality acrylic and featuring a robust construction, the Visi-Float offers excellent durability and accuracy, even in demanding applications.
Dwyer Magnehelic mounting accessories
| SKU | 2001498 |
The Dwyer Magnehelic can be mounted in different ways. By default, the instrument is equipped with all the accessories needed to mount the Magnehelic into a round hole in a panel. In addition, there are various accessories for mounting on a round tube, in a (system) wall, or with various brackets in a wall cabinet.
Dwyer averaging flow sensor series PAFS-1000
| SKU | 2019461 |
The Series PAFS-1000 Lightweight Flow Sensor is ideal for sensing differential pressure in the inlet section of variable air volume terminal units and fan terminal units. Units can also be used to sense differential pressure at other locations in the main or branch duct systems.
Passieve temperatuursensor voor buitenmontage serie O-4
| SKU | 2025401 |
De O-4 serie bestaat uit passieve temperatuursensoren voor het meten van temperaturen in de buitenlucht. De O-4 serie is verkijgbaar met PT100, PT1000, 3 kOhm, 10 kOhm en 20 kOhm uitgangen.
Passieve temperatuursensor RVS voor ruimtemeting serie TE-WSS
| SKU | 2020465 |
De TE-WSS temperatuursensoren zijn vervaardigd uit RVS en kunnen vlak in een wand gemonteerd worden. Het robuuste RVS ontwerp maakt de TE-WSS serie geschikt voor industriële ruimtes, cleanrooms, maar ook in bijvoorbeeld klaslokalen. De TE-WSS serie is er in verschillende uitvoeringen, zoals; PT100, PT1000 en verschillende NTC varianten.
Dwyer temperature sensor for duct mounting series TE-D
| SKU | 2018388 |
The Dwyer TE-D series consists of highly priced temperature sensors for installation in air ducts. There are several outputs that allow the sensor to be read on any type of Building automation system.
Dwyer temperature sensor for wall mounting series TE-E
| SKU | 2024540 |
The Dwyer TE-E series consists of very competitively priced temperature sensors for mounting in walls on the wall. There are several outputs for each type of BMS possible
Dwyer differential pressure switch series ADPS
| SKU | 2016729 |
The Series ADPS Adjustable Differential Pressure Switch is designed for pressure, vacuum, and differential pressures. The adjustment knob allows changes to the switching pressure to be made without a pressure gage. The ADPS is available with settings from 20 Pa up to 5000 Pa. The compact size, adjustment knob and low cost make the ADPS the perfect choice for HVAC applications.
Middelende tempratuursensor voor kanaalmontage serie TE-A
| SKU | 2026012 |
De TE-A serie bestaat uit middelende temperatuursensoren voor grote kanalen en luchtbehandelingskasten. De buigbare aluminium sensoren zijn verkrijgbaar in lengtes van 150, 300 en 600 mm. Deze capillairen bestaan uit vier temperatuursensoren die intern worden gemiddeld. De CC1-montagebeugels zijn beschikbaar om de capillair op de wand van de buis of luchtbehandelingsunit te monteren zonder de sen…
Dwyer variable area flowmeter series RM
| SKU | 2009061 |
The Rate-Master® flowmeter line of direct reading precision flowmeters incorporates many unique user features at moderate cost. These low cost flowmeters are ideal for general use.
Dwyer Minihelic differential pressure gage series 2-5000
| SKU | 2001533 |
The Minihelic is a small differential pressure manometer, suitable for many of the same applications as the Magnehelic gage where the greater accuracy, sensitivity, and higher and lower differential pressure ranges of the Magnehelic gage are not required. It can safely operate at total pressures up to 200 kPa. With the housing molded from mineral and glass filled nylon and the lens molded from ac…
Dwyer inclined vertical manometer series Mark II
| SKU | 2001556 |
Dwyer Mark II series molded manometers are of the inclined and inclined-vertical types. The curved inclined-vertical tube of the Mark II manometers can be mounted on any vertical surface with the two mounting screws provided. Ranges available from 0-80 mmH2O and from -10 to + 700 Pa.
Passieve temperatuursensor voor buitenmontage serie TE-OND
| SKU | 2026045 |
De TE-OND serie bestaat uit passieve temperatuursensoren voor het meten van temperaturen buiten. De temperatuursensoren zijn geschikt om buiten te monteren, maar niet in direct zonlicht. Voor montage in direct zonlicht raden we een uitvoering met weerhut aan. De TE-OND serie is verkijgbaar met PT100, PT1000, 3 kOhm, 10 kOhm en 20 kOhm uitgangen.
Dwyer U-tube liquid column manometer series Flex-Tube
| SKU | 2001547 |
These inexpensive manometers measure positive, negative and differential pressures. Dwyer Flex-Tube U-Tube Manometers combine the inherent accuracy of the simple "U" Tube with the durability of tough, long-lasting plastic construction. Series 1221 Manometer, the simplest, lowest cost basic U-gage. Series 1222 Manometer, alll the features of the 1221 plus magnetic clips. Series 1223 Manometer, the…
Dwyer Magnehelic differential pressure gauge series 2000
| SKU | 2001509 |
Dwyer Magnehelic gage for high accuracy, guaranteed within 2% of full scale and for the wide choice of 81 models available to suit your needs precisely. Using Dwyer's simple, frictionless Magnehelic gage movement, it quickly indicates low air or noncorrosive gas pressures, either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer flui…
Dwyer differential pressure switch series 1910
| SKU | 2001571 |
The most popular differential pressure switch combines advanced design and precision construction to make these switches able to perform many of the tasks of larger, costlier units. Designed for air conditioning service, they also serve many fluidics, refrigeration, oven and dryer applications. For air and non combustible compatible gases, Series 1910 switches have set points from 18 to 400 Pa an…
Dwyer duct mounting temperature transmitter series BTT
| SKU | 2023511 |
The BTT series temperature transmitters are ideal for measuring temperature in air ducts. Sensor lengths of up to 450 mm insertion are possible for duct mounting sensors. The plastic terminal box with fastening tabs makes the installation easier.
Flow switch for cooling and heating systems series FS-2
| SKU | 2019470 |
The FS2 series is a vane switch for flow detection in water pipes. These flow switches can be used as flow detection in cooling systems and central heating systems in building automation. The switch can be used to detect whether or not there is flow in a water pipe to start or stop the operation of a pump. The FS2 series has a brass threaded connection and the vane is made of stainless steel.
Dwyer vane switch series AAFS
| SKU | 2021464 |
The Model AAFS air flow switch provides excellent sensitivity and reliability at a very reasonable price. Quality features include a rugged die cast body, stainless steel vane and SPDT snap switch. Unit is field adjustable from 400-1600 FPM. Mounting is fast and simple,with only two screws needed. Vane fits 6 inch or larger ducts.
Passieve temperatuursensor voor buiten met weerhut serie TE-RND
| SKU | 2019102 |
De TE-RND serie bestaat uit passieve temperatuursensoren voor buiten. De weerhut maakt de TE-RND serie ook geschikt voor plaasing in direct zonlicht. De TE-RND serie is verkijgbaar met PT100, PT1000, 3 kOhm, 10 kOhm en 20 kOhm uitgangen.
Dwyer duct mounting humidity transmitter series RHP-D
| SKU | 2023587 |
The Dwyer RHP-D series has a combined temperature and humidity sensor for installation in air ducts. There can be selected from different precision and a performance with or without display. There are several outputs that allow the sensor to be read on any type of BMS.
Dwyer water differential pressure switch series DX
| SKU | 2020500 |
The DX series differential pressure switch is suitable for detecting water pressure differences within the building automation. The DX series can be used as filter monitoring, but also as a flow monitor in, for example, a pump, heating system or cooling machine. The switch is robust and easy to install with the integrated mounting bracket. The splashproof housing makes it possible to place the sw…