Temperatuur- en luchtvochtigheidstransmitters

The Kimo TH210 series is a relative humidity transmitter with or without display. The TH210 is ideal to use as temperature and humidity measurement in air ducts and rooms for connection to a building management system. The transmitter calculates the absolute humidity, dew point, wet and dry bulb temperature. For temperatures up to 180°C stainless steel sensors are available. There are also severa…

The Kimo TH110 series is a relative humidity transmitter with or without display. The TH110 is ideal to use as humidity and temperature measurement in rooms and air ducts for connection to a building management system. The installation is very easy and the housing can be mounted in two parts making it ideal for installers.

The Kimo HM110 series is a transmitter with or without display. The HM110 is ideal to use as humidity measurement in air ducts and rooms for connection to a building management system. The installation is very easy and the housing can be mounted in two parts making it ideal for installers.

The Dwyer WHT series humidity transmitters measure temperature and relative humidity in the outside. The waterproof housing and sintered filter protect the sensor from weather effects. The WHT series is available with an analogue output for relative humidity and optionally also temperature.

• Measuring unit, Ethernet-based (PoE), Te/RH/Atm. Pressure, display
• Model: ATE-TRP
• Temperature range: -30°C to +60°C (± 0.4°C)
• RH range: 0 to 100% RH (± 2.5% RH)
• Atm. Pressure range: 600 to 110 hPa (±1.3 hPa *)
• Probe length: 75 mm
• Protocols: HTTP(s), Web server (www), HTTP GET (JSON, XML), ModbusTCP, SNMPv1, SNMPv2c, SNMP…

• Measuring unit, Ethernet-based (PoE), Te/RH, display
• Temperature range: -30°C to +60°C (± 0.4°C)
• RH range: 0 to 100% RH (± 2.5% RH)
• Probe length: 75mm
• Protocols: HTTP(s), Web server (www), HTTP GET (JSON, XML), ModbusTCP, SNMPv1, SNMPv2c, SNMPv3
• Alarm protocol: e-mail (SMTP), syslog
• Power supply: Power over Ethernet (IEEE 802.3af) or 5–24 V…

• Measuring unit, Ethernet-based (PoE), 1x connection (for Pt1000 sensor), display
• Model: ATE-TE
• 1x connection (RCA): for Pt1000 sensor
• Protocols: HTTP(s), Web server (www), HTTP GET (JSON, XML), ModbusTCP, SNMPv1, SNMPv2c, SNMPv3
• Alarm protocol: e-mail (SMTP), syslog
• Power supply: Power over Ethernet (IEEE 802.3af) or 5–24 V DC
…

• Measuring unit, Ethernet-based (PoE), 1x connection (Te/RH or CO2 sensor), display
• Model: ATE-1U
• 1x connection (4-pin Hirschmann): for Te/RH or CO2 sensor
• Protocols: HTTP(s), Web server (www), HTTP GET (JSON, XML), ModbusTCP, SNMPv1, SNMPv2c, SNMPv3
• Alarm protocol: e-mail (SMTP), syslog
• Power supply: Power over Ethernet (IEEE 802.3af) or 5–24 V DC