All instrumentation

This second generation "loop powered" indicating temperature transmitter provides a large, easy to read, digital temperature display plus accurate 4/20mA analogue and HART® digital outputs. The transmitter has a resistance thermometer, thermocouple, resistance or voltage input and may be configured using the internal push buttons or via HART® digital communication.

This second generation "loop powered" indicating temperature transmitter provides a large, easy to read, digital temperature display plus accurate 4/20mA analogue and HART® digital outputs. The transmitter has a resistance thermometer, thermocouple, resistance or voltage input and may be configured using the internal push buttons or via HART® digital communication

The general purpose ultrasonic level transmitter provides continuous level measurement up to 49.2" (1.25m) with a 4-20 mA signal output, and is configured via our free WebCal software. The embedded level controller can lower cost by replacing external control hardware. This non-contact liquid level sensor is ideally suited for corrosive, sticky or dirty liquids, and is widely selected for small...

The general purpose ultrasonic level transmitter provides continuous level measurement up to 9.8' (3m) with a 4-20 mA signal output, and is configured via our free WebCal software. The level sensor has 4 programmable relays with selectable hysteresis and fail-safe logic. The embedded level controller can lower cost by replacing external control hardware. This non-contact liquid level sensor is...

The general purpose ultrasonic level transmitter provides continuous level measurement up to 18.0' (5.5m) with a 4-20 mA signal output, and is configured via the free Webcal software. The level sensor has 4 programmable relays with selectable hysteresis and fail-safe logic. The embedded level controller can lower cost by replacing external control hardware. This non-contact liquid level sensor...

The magnetic, explosion proof, level switches of FineTek are custom made​​. Length, number of switching points and fitment can be made ​​according to customer specifications. The level switches consist of high quality materials and are quality controlled. The function of the switch, NO or NC, is easily set by the user. All switches are available with explosion proof ATEX certificate.

FineTek's side mounted float level sensor are manufactured specifically for horizontal mounting in a tank or vessel. The sensors have a marine approval or are intrinsically safe. Ideal for the process industry of maritime industry.

The MFS flowsensor is a patented, self-averaging flow-sensor for all kinds of ventilation ducts. The average of air flow is measured across the whole length of the sensor. Gives a 2,5 times higher differential pressure than a Prandtl tube measuring. Easy to install in existing ducts. Lengths from 100 to 2500 mm.

Micatrone's flow sensor MFS-SS has been developed to meet the great demand for accurate air flow measurement in all types of air-handling systems. The MFS-SS is based on the principle of averaging the velocity profile over the height or the diameter of the duct.

Mechanical temperature switch for local mount in a weatherproof housing. The setpoint is adjustable from the exterior,

Mechanical temperature switch for remote mount in a weatherproof housing. The setpoint is adjustable from the exterior.

The SC2400 Series is a compact and inexpensive vibrating level switch by Finetek. The tuning fork is applicable in both liquids and bulk. The BSP threaded connection, transistor output and high temperature and pressure capacity of the SC2400 is an excellent solution for many installations. For more demanding apllications where the SC2400 is not sufficient, the SC series of FineTek offers many m...

The Finetek SC-Probe series works on the same principle as a tuning fork, but has the advantage that the sensor is in one piece. Thus, the medium can not sit between the sensor, which, in a traditional tuning fork can be the case. The SC2100 is the standard version that can be completely custom made​​, there is also an ATEX certified version, the SC1700.

ATEX approved flameproof temperature switch with remote sensor. The switch is available with 1 (T1X) or 2 (T2X) switch points, adjustable from exterior

The UNS-VA/SB4 is a rugged and sturdy bilge level switch made from stainless steel. It is especially designed for shipbuilding industry, offshore, oil tanks and sewage works. The UNS-VA/SB4 has 4 standard cable lengths : 1, 5, 10 and 15 meter.

The UNS-VA/SB5 with test function, is a rugged and sturdy bilge level switch made from stainless steel. It is especially designed for shipbuilding industry, offshore, oil tanks and sewage works. The UNS-VA/SB5 has 4 standard cable lengths : 1, 5, 10 and 15 meter.

The Barksdale UTA2 temperature transmitter is suitable for use in machine construction and hydraulics because of its compact size. The temperature sensor has an insertion length of 17 and 50 mm and has a diameter of 6 mm, optionally other lengths are also possible.

The Barksdale UTF2 temperature sensor is suitable for use in machine construction and hydraulics due to its compact size. The PT100 sensor has an insert length of 17 and 50 mm and has a diameter of 6 mm, optionally other lengths are also possible.

The LU10 series ultrasonic level switch provides reliable level detection of chemical liquids, solvents, hydrocarbons and petroleum based fluids. Media examples include fuel, acetone and hydrochloric acid. The submersible polypropylene or PFA sensor can be mounted through the tank wall or in the tank as a high or low level alarm.

The Flowline LZ12 vibration level switch provides reliable liquid level detection of dirty liquids such as those with light to medium coating, scaling or foaming characteristics with a relay output. Media examples include wastewater, diluted caustic soda and light weight oil. For optimum performance, the liquid level switch automatically adjusts for coating build up, and if necessary, outputs a...

The Switch-Tek LP15 series offers reliable high or low level detection for water-based conductive liquids with light pollution, such as copper sulphate and saline. The submersible polypropylene level switch can be mounted by a non-metallic tank wall, or inside a tank as a high or low level alarm.

The Switch-Tek LP50 series capacitive level switch provides reliable level detection of water-based conductive liquids such as hydrochloric acid, sulfuric acid and water. The level sensor is mounted on the outside of a non-metallic tank and can be used as a high or low level alarm. The sensor detects a level through walls up to 25 mm thick.

De MMSP serie is een zonnewarmtetransmitter die de intensiteit van het zonlicht meet. De zonintensiteit wordt uitgedrukt in W/m2. De MMSP kan bijvoorbeeld worden gebruikt voor het bepalen van de warmteopbrengst van zonnepanelen. Zo kan de zonnewarmtetransmitter detecteren of de zonnepanelen nog wel genoeg energie opbrengen, of dat deze wellicht vervuild of defect zijn geraakt.

In addition to differential pressure, the MF-PFC transmitter also measures air velocities in combination with the MFS self-averaging flow sensors. The transmitter has 2 analog outputs that can be used for differential pressure, flow or PI control output. For example, the control output can be used to directly control a VAV valve. High accuracy and stability make the MF-PFC ideal for use in labo...