Skip to main content
Dwyer Instruments
Search results: 49-88 of 88
Dwyer High-Accuracy Magnehelic Pressure gauge Series 2000-HA
The 2000-HA Series High Accuracy Magnehelic® pressure differential manometer is twice as accurate as the standard Magnehelic® manometer. The High Accuracy Magnehelic® pressure differential manometer provides a mirrored overlay to eliminate any parallax errors when measuring. A six-point calibration certificate is included with any high-precision model. The robust IP67 housing (front) helps to com…
Dwyer carbon monoxide CO transmitter series GSTA
The Dwyer GSTA series is a carbon monoxide (CO) transmitter for room or channel mounting. The GSTA series can be selected with and without display and has a 0-10 V or 4-20 mA output. Optionally there is an implementation with Modbus or BACnet communication.
Dwyer Smart air speed transmitter series AVUL
The Dwyer AVUL series measures air speed and volume flow in ventilation ducts. The AVUL works on a hot wire principle with special coating for a long life. There may be chosen for English or metric units. Furthermore, there are analogue outputs, but also versions for Smart Buildings with BACnet or Modbus communication.
Dwyer duct mounting humidity transmitter series RHP-D
The Dwyer RHP-D series has a combined temperature and humidity sensor for installation in air ducts. There can be selected from different precision and a performance with or without display. There are several outputs that allow the sensor to be read on any type of BMS.
Dwyer temperature transmitter for wall mounting series BTT-E
The Dwyer BTT-E series is a simple space temperature transmitter for wall mounting. For the analogue output, you can choose between 4-20 mA and 0-10 V, so that the transmitters can be connected to any BMS.
Dwyer temperature transmitter with radiation shield series BTT-R
The Dwyer BTT-R series is a temperature transmitter for outdoor mounting with radiation shield. The weather shelter ensures that the temperature measurement is not affected by direct sunlight. The BTT-R temperature transmitter has an analogue output for coupling to each building management system.
Dwyer broken bag detection particle transmitters series PMT2
The Dwyer PMT2 series is a particle transmitter designed for broken bag detection (fiter leak detection). The special electrostatic induction technology detects particles that flow past the sensor and converts this into a 4 to 20 mA signal based on the concentration of these particles. The PMT2 offers 6 sensitivity ranges that allow the user to choose the range that best fits the application. The…
Dwyer electromagnetic flow meter series IEF
The Dwyer IEF series electromagnetic flow transmitter is an adjustable flow meter with electromagnetic technology that accurately and reliably measures a fluid velocity. The IEF series is specifically designed to deliver superior performance in combination with easy installation and use. The IEF flow meter is adjustable for pipe sizes from 100 to 900 mm and offers various output signals, includin…
Dwyer CO2 transmitter for industry, animal husbandry and greenhouses series CDWP
The Dwyer CDWP series consists of inductive CO2 transmitters for, for example, livestock farming (chicken barns), technical areas, monitoring of CO2 cooling systems and greenhouses. The CDWP measures the carbon dioxide content with an infrared (NDIR) measuring cell with a long lifespan. This sensor technology offers the highest accuracy compared to automatic baseline correction (ABC logic), which…
Flow switch for cooling and heating systems series FS-2
The FS2 series is a vane switch for flow detection in water pipes. These flow switches can be used as flow detection in cooling systems and central heating systems in building automation. The switch can be used to detect whether or not there is flow in a water pipe to start or stop the operation of a pump. The FS2 series has a brass threaded connection and the vane is made of stainless steel.
Differential pressure transmitter for DIN rail mounting series 616KD
The Dwyer 616KD differential pressure transmitters are compact and designed for DIN rail mounting. The 616KD series is available in various accuracies, up to 0.25%, and in a range of measurement spans. With simple calibration buttons, you can easily set the zero and span points, saving time during installation and maintenance.
Carbon monoxide transmitter for room monitoring series CMT200
The CMT200 series carbon monoxide transmitters from Dwyer are ideal for use in underground parking garages, workshops, and boiler rooms. The CO detector provides an analog output signal that can be read by a building management system, allowing ventilation to be activated when carbon monoxide levels become too high.
CO2-transmitter voor ruimtemontage serie CDT-E
De CDT-E serie is een kooldioxide (CO2) transmitter voor ruimtemontage. De CO2-transmitter meet het CO2-gehalte en optioneel ook de temperatuur in de ruimte. De meetwaardes kunnen met analoge signalen worden doorgestuurd naar het gebouwbeheersysteem om hiermee de ventilatie aan te sturen. De CDT serie is er in meetbereiken van 2000 een 5000 ppm CO2. Optioneel kan de CO2-transmitter worden voorzie…
CO2-transmitter voor kanaalmontage serie CDT-D
De CDT-D serie is een koolmonoxide (CO2) transmitter voor kanaalmontage. De CO2-transmitter meet het CO2-gehalte en optioneel ook de temperatuur in een luchtkanaal. De meetwaardes kunnen met analoge signalen worden doorgestuurd naar het gebouwbeheersysteem om hiermee de ventilatie aan te sturen. De CDT-D serie is er in meetbereiken van 2000 een 5000 ppm CO2. Optioneel kan de CO2-transmitter worde…
CO2 en luchtvochtigheidstransmitter voor ruimtemontage serie CDTR-E
De CDTR-E serie is een kooldioxide (CO2) en luchtvochtigheid transmitter voor ruimtemontage in één. De CO2-transmitter meet het CO2-gehalte, de relatieve vochtigheid en optioneel ook de temperatuur in de ruimte. De meetwaardes kunnen met analoge signalen worden doorgestuurd naar het gebouwbeheersysteem om hiermee de ventilatie aan te sturen. De CDTR-E serie is er in meetbereiken van 2000 een 5000…
VOC-transmitter voor kanaalmontage serie CDTV
De CDTV Kooldioxide en VOC-transmitters (vluchtige organische stoffen) verlaagt de energiekosten in gebouwen door de hoeveelheid geconditioneerde lucht te verlagen op basis van het gebruik van de ruimte. Door zowel CO2 als VOC te detecteren, kan de CDTV dampen detecteren die mogelijk moeten worden afgezogen voor een beter binnenklimaat.
Middelende tempratuursensor voor kanaalmontage serie TE-A
De TE-A serie bestaat uit middelende temperatuursensoren voor grote kanalen en luchtbehandelingskasten. De buigbare aluminium sensoren zijn verkrijgbaar in lengtes van 150, 300 en 600 mm. Deze capillairen bestaan uit vier temperatuursensoren die intern worden gemiddeld. De CC1-montagebeugels zijn beschikbaar om de capillair op de wand van de buis of luchtbehandelingsunit te monteren zonder de sen…
Passieve temperatuursensor voor buitenmontage serie TE-OND
De TE-OND serie bestaat uit passieve temperatuursensoren voor het meten van temperaturen buiten. De temperatuursensoren zijn geschikt om buiten te monteren, maar niet in direct zonlicht. Voor montage in direct zonlicht raden we een uitvoering met weerhut aan. De TE-OND serie is verkijgbaar met PT100, PT1000, 3 kOhm, 10 kOhm en 20 kOhm uitgangen.
Passieve temperatuursensor voor buiten met weerhut serie TE-RND
De TE-RND serie bestaat uit passieve temperatuursensoren voor buiten. De weerhut maakt de TE-RND serie ook geschikt voor plaasing in direct zonlicht. De TE-RND serie is verkijgbaar met PT100, PT1000, 3 kOhm, 10 kOhm en 20 kOhm uitgangen.
Passieve temperatuursensor voor buitenmontage serie O-4
De O-4 serie bestaat uit passieve temperatuursensoren voor het meten van temperaturen in de buitenlucht. De O-4 serie is verkijgbaar met PT100, PT1000, 3 kOhm, 10 kOhm en 20 kOhm uitgangen.
Passieve temperatuursensor RVS voor ruimtemeting serie TE-WSS
De TE-WSS temperatuursensoren zijn vervaardigd uit RVS en kunnen vlak in een wand gemonteerd worden. Het robuuste RVS ontwerp maakt de TE-WSS serie geschikt voor industriële ruimtes, cleanrooms, maar ook in bijvoorbeeld klaslokalen. De TE-WSS serie is er in verschillende uitvoeringen, zoals; PT100, PT1000 en verschillende NTC varianten.
Temperatuurtransmitter voor buitenlucht serie BTT-O
De BTT-O serie bestaat uit temperatuurtransmitters voor buitenlucht. De temperatuurtransmitters kunnen worden uitgevoerd met een 0-10V of 4-20mA uitgang. De spatwaterdichte behuizing kan buiten worden toegepast. Voor plaatsing in direct zonlicht adviseren we een versie met weerhut.
Omni-directional motion sensor for suspended ceiling OSC-200 series
The OSC-200 series omni-directional presence sensor can be used for the automatic control of ventilation systems. A spherical lens provides a 360° detection range using infrared technology. The integrated dual delay processor saves energy by eliminating false motion detection. The OSC-200 motion sensor is designed for ceiling mounting and comes pre-wired for easy installation.
Luchtvochtigheidtransmitter met externe sensor serie RH-R
De RH-R serie luchtvochtigheidstransmitters zijn geschikt voor toepassingen waarbij de ruimte beperkt is. De compacte sensor wordt beschermd door een verwijderbaar filter. De sensor kan tot wel 5 meter van de weerbestendige basis worden gemonteerd. De RH-R is ideaal voor klimaatkamers of montage in kanelen en luchtbehandelingskasten.
Dwyer luchtvochtigheidtransmitter serie RHRS
Met de RHRS serie weerhut voor luchtvochtigheidssensoren voorkomt u directe invloed van regen en zonlicht op de meting. De RHRS is er in een uitvoering met 6 of 10 lamellen. De weerhut wordt geleverd exclusief luchtvochtigheidssensor. De RHRS is geschikt voor verschillende modellen sensoren. De handige montage beugel maakt de de weerhut geschikt voor wandmontage of montage op buizen van 3/4 tot 1…
Dwyer differential pressure transmitter with flow calculation and alarms series DH3
The Dwyer DH3 series Digihelic differential pressure gauge is a 3-in-1 instrument with a digital display, relay contacts and a transmitter output, all packed in the popular Photohelic housing. By combining these 3 functions, you can reduce different instruments to one product, saving you inventory, installation time and money. The DH3 controller is the ideal instrument for pressure (difference) m…
Dwyer Magnesense differential pressure transmitter series MSX Pro
The Dwyer Magnesense Series MSX Pro differential pressure transmitter is the professional differential pressure transmitter that meets rigorous industry standards with innovative product design. The instrument has exceptional stability for use in critical building applications with the versatility of our original series Magnesense transmitters. Pressure ranges in Pa, mmH2O, and inWC are available…
Dwyer air velocity transmitter for low velocities series AVLV
The Dwyer AVLV series is an air velocity transmitter for very low velocities below 2 m/s. The AVLV has universal inputs for monitoring equipment and the output range can be configured by local DIP switches. Process values can be monitored locally through the optional integral display or the portable remote display tool. The air velocity transmitter is suitable for quality intensive environments s…
Dwyer Critical room pressure monitor series RPMC
The Dwyer pressure monitor series RPMC is designed for critical applications with low differential pressures. The transmitter uses a capacitive pressure sensor to achieve extremely high accuracy. There is a choice between ± 0.25% or ± 0.5% RSS. The RPMC has the same dimensions as the Magnehelic which simplifies an upgrade in the field. The pressure monitor is suitable for applications requiring s…
Dwyer Room status monitor series RSME
The Dwyer pressure monitor series RPMC is designed for critical applications with low differential pressures which must also be directly visible locally. The 4.3” full color touchscreen can be configured to measure positive or negative pressure in, for example, cleanrooms, hospitals, isolation rooms and laboratories. The Dwyer RSME Room Status Monitor is a complete solution featuring a touchscree…
Dwyer Room pressure monitor series RPME
The Dwyer pressure monitor series RPME is designed for critical applications with low differential pressures. The transmitter uses a piezo pressure sensor to achieve high accuracy. There is a choice between ±0.5% or ±1% RSS. The RPME has the same dimensions as the Magnehelic which simplifies an upgrade in the field. The pressure monitor is suitable for applications requiring strict pressure monit…
Dwyer Room status monitor series RSMC StabiliSense
The Dwyer RSMC Room Status Monitor Series is designed for critical applications with low differential pressures that also require immediate local visibility. The 4.3” full color touchscreen can be configured to measure positive or negative pressure in, for example, cleanrooms, hospitals, isolation rooms and laboratories. The Dwyer RSME Room Status Monitor is a complete solution with a touchscreen…
Dwyer flow meter series VF Visi-Float
The Dwyer Flow Meter Series VF Visi-Float is a compact and reliable solution, ideal for measuring air, water, and other compatible liquids or gases. Made from high-quality acrylic and featuring a robust construction, the Visi-Float offers excellent durability and accuracy, even in demanding applications.
Wall-mounted motion sensor OSW-100 series
The OSW-100 series wall-mounted motion sensor is designed for the automatic control of an HVAC ventilation system based on occupancy. A unique dual delay processor eliminates false triggers. The OSW-100 model features a wide viewing angle of 110° to detect movement up to 15 meters.
Dwyer differential pressure switch series 1910
The most popular differential pressure switch combines advanced design and precision construction to make these switches able to perform many of the tasks of larger, costlier units. Designed for air conditioning service, they also serve many fluidics, refrigeration, oven and dryer applications. For air and non combustible compatible gases, Series 1910 switches have set points from 18 to 400 Pa an…
Dwyer aan-uit of PID temperatuurregelaar serie 4C
De Serie 4C 1/4 DIN Temperatuurregelaar: Eenvoudige installatie, nauwkeurige PID-regeling, diverse uitgangen en configureerbare alarmen. Ideaal voor ovens, koelers en meer.
Dwyer RHPX Series Humidity and Temperature Transmitters
The Dwyer RHPX series offers a reliable solution for simultaneously measuring relative humidity and temperature in HVAC and building management systems. By combining two essential parameters in one compact transmitter, this device helps improve energy efficiency while optimizing occupant comfort.
Dwyer ATEX/IECEx Differential Pressure Controller Series AT-DHC
The Dwyer Series AT-DHC is the successor to the well-known AT2DH3 differential pressure controller. This new generatio…
Dwyer Series PBLT2 submersible level transmitter for liquids
The Dwyer Series PBLT2 is a robust level transmitter for measuring liquid levels in water, wastewater, and slurries. T…