Kimo Sauermann

The Kimo KPA320 is a data logger for measuring temperature, air humidity and barometric pressure for indoor air quality. The air quality data logger can register 4 parameters simultaneously and has a memory of 2 million measuring points. The KPA320 can be read out with the free Kilog Lite PC software, but also communicates via Bluetooth with an Android, or Apple IOS device. For advanced reports,…

Infrared thermometer KIRAY 100 with dual laser sighting is a key tool to diagnose, inspect and check any temperature, with the advantage of using “no-contact” technology. You can safely measure surface temperatures of hot objects, dangerous or difficult to access. Perfect tool to take temperature in a house, a garage, a workshop, an office, a car, a kitchen et cetera.

The C310 transmitters are extendable by SPI2 internal pressure modules. It is also possible to extend the C310 with relay output module C4R, which has four 3A relays. If the two standard analog outputs are not sufficient, they can be extended by two more with the O2S module.

The HP range of inclined liquid column manometers, measure slight variations in pressure, depression or differential pressure of air or gas. The are particulary recommended for measuring overpressure in clean rooms, laboratories, aseptic rooms and laminar flows.

The new C310 series are multifonctional transmitters which can be extended by an internal pressure module and two external probes. The display can show up to 4 parameters, but can also display a trend graph and the min/max values of each channel. The C310 has two analog outputs, which can be extended by two more. Modbus and Ethernet communication are available as an option.

KIMO offers a wide range of high-quality and accurate Pitot tubes, as per the AFNOR NFX 10-112 norm. These Pitot tubes, when being connected to a differential column / or needle / or electronical manometer, can measure the dynamic pressure of a moving fluid in a duct, and then can deduct its air velocity in m/s and its airflow in m3/h. These Pitot tubes are used in HVAC field, vacuum cleaning and…

A reliable and accurate portable instrument for measuring pressure and differential pressure and air velocity. (with pitot tube). Standard functions are: min, max, hold, self-calibration, adjustable automatic shut-off and backlight. Each instrument is supllied with a transport case, tubing, calibration certificate (model E) or adjusting certificat (model S)

The Kimo VT210 thermo-anemo hygrometer is a very comprehensive instrument for measuring air velocity and flow in air ducts, or the intake and discharge grids thereof. There is a choice of fixed and telescopic heat wire and impeller sensors in various diameters. Furthermore, the hand meter can be extended with additional sensors for temperature and humidity. The VT210 is available in various packa…

A reliable and accurate portable instrument for measuring pressure and differential pressure. Standard functions are: min, max, hold, self-calibration, adjustable automatic shut-off and backlight. Each instrument is supllied with a transport case, tubing, calibration certificate (model E) or adjusting certificat (model S).

The Kimo MP210 micromanometer is a very extensive instrument for measuring pressure difference and air velocity with pitot tube in air ducts, over filters and in clean rooms. There is a choice of different pressure modules with different measuring ranges. Furthermore, the hand meter can be extended with extra sensors for temperature and air speed. The MP210 is available in various packages includ…

The multifunctional Kimo HQ210 indoor climate meter can measure all parameters that are important for a pleasant indoor climate. For example, the HQ210 can measure temperature, relative humidity, carbon dioxide (CO2), carbon monoxide (CO) and omni-directional flow (draft). The HQ210 series is available in composite packages with a selection of sensors, or can be assembled according to your own wi…

The multifunctional Kimo TM210 portable thermometer measures temperatures and temperature differences and can be used to determine the U-value (heat coefficient). The TM210 series is available in composite packages with a selection of sensors, or can be assembled entirely according to your own wishes. The hand meter is supplied in a robust carrying case and the packages also with calibration of t…

The Debimo self-averaging flow sensors work on the same principle as a pitot tube. The advantage of this measurement principle is that non-laminar air flow can still be measured reliably. The Debimo sensors are made of aluminum and are available in a wide range of standard lengths. In addition, the sensors can also be customized.

A reliable and accurate portable instrument for measuring rotations. Available with an optical probe and a contact adaptor. Standard functions are: min, max, hold, self-calibration, adjustable automatic shut-off and backlight. Each instrument is supllied with a transport case, calibration certificate (model E) or adjusting certificat (model S)

The TST series temperature switches can be used as temperature sensors for controlling temperatures in rooms or ducts. The status LED indicates if an alarm level is exceeded and the display shows the current temperature. The installation is very easy and the housing can be mounted in two parts making it ideal for installers.

The Kimo TM110 series is a transmitter with or without display. The TM110 is ideal for use as a temperature measurement in rooms and air ducts for connection to a building management system. The installation is very easy and the housing can be mounted in two parts making it ideal for installers.

The Kimo TM210 series is a transmitter with or without display. The TM210 is ideal for use as a temperature measurement in rooms and air ducts for connection to a building management system. This temperature transmitter has an internal sensor and a PT100 input, or two PT100 inputs for measuring temperature differences.

Reliable and accurate handheld meter to measure air velocity and flow. The VT110 series has a hotwire sensor with a built-in temperature sensor. Standard functions: min, max, hold, auto power off and choice of units. Each instrument is supplied in a carrying case and calibration report or test certificate (S models).

The LV110 series offers three different vane probes for measuring air velocities. There are van probes of 14, 70 and 100 mm. Standard functions: min, max, hold, auto power off and choice of units. Each instrument is supplied in a sturdy carrying case and calibration report or test certificate (S models).

The Sauermann Kimo Si-ATE320 is a flush-mount display that clearly presents measurement values from external sensors and transmitters. This display is ideal for HVAC, cleanrooms, and industrial installations, where multiple parameters such as temperature, humidity, airflow, and pressure need to be monitored.

The Sauermann Si-CPE320 is excellent for use in clean rooms. It is possible to mount the transmitter completely flush-mounted so that no dirt or dust can remain on it. The transmitter features a waterproof front panel made of high-quality stainless steel with an integrated touchscreen and is resistant to cleaning with hydrogen peroxide.

For cleanrooms, conditioned rooms and industrial ventilation applications where accurate measurement, control and monitoring of air parameters are critical, Sauermann's Si-C320 transmitters provide reliable measurements and help you meet the most stringent regulations.

Differential pressure transmitter -250...250 Pa

Convenient mounting box for wall mounting Kimo transmitters in the series CPE300. The BD300 can be sealed watertight into the wall prior to installing the CPE300. This makes the installation of the CPE300 series a piece of cake.