Instrumentation for measuring flow

The Rate-Master® flowmeter line of direct reading precision flowmeters incorporates many unique user features at moderate cost. These low cost flowmeters are ideal for general use.

V10 is esigned to provide an inexpensive, reliable unit to monitor the presence or absence of flow in a system. The V10 flow switch is used to monitor unattended equipment and protect it from costly damage. The V10 flow switch utilizes a rugged, hermetically sealed reed switch which is encapsulated in a polypropylene switch housing that fits into a standard heavy duty leak proof brass body or o...

The MF3000 flow meter for solids is designed for flow measurement in metal tubes from a few kg / hour to many tons / hour. The system is suitable for flow measurements of powders, granulates and granules from 1 nm to 2 cm in pneumatic or free-fall conditions. The measuring principle of the MF 3000 is based on the doppler effect, where microwaves are reflected by particles passing through the tu...

De Schneider electric 8400A serie magnetische flowbuis vormt samen met de IMT serie transmitters een economische flowmeter met wafer-aansluiting. De 8400A magnetische flowmeters zijn beschikbaar in maten van DN10 tot DN150 voor licht industriële toepassingen tegen een scherpe prijs. Voor een hogere nauwkeurigheid en chemische bestendigheid adviseren wij de 8500A serie.

De Schneider electric 8500A serie magnetische flowbuis vormt samen met de IMT serie transmitters een robuuste en betrouwbare flowmeter met wafer-aansluiting. De 8500A magnetische flowmeters zijn beschikbaar in maten van DN2,5 tot DN100 voor industriële toepassingen met hoge nauwkeurigheid. Voor de lining en electrodes van de 8500A kan worden gekozen uit verschillende materialen voor optimale ch...

The Schneider electric 9500A series magnetic flow tube together with the IMT series transmitters form a reliable and universal flow meter with flange connection. The 9500A magnetic flow meters are available in sizes from DN25 to DN2000 suitable for drinking water, wastewater and light industrial applications. The 9500A series can also be used as a bidirectional flow meter. We recommend the 9700...

De Schneider electric 9700A serie magnetische flowbuis vormt samen met de IMT serie transmitters een flowmeter voor chemische toepassing met flens-aansluiting. De 9700A magnetische flowmeters zijn beschikbaar in maten van DN10 tot DN2000 geschikt voor chemische en zware industriële applicaties. Voor de lining en electrodes van de 9700A kan worden gekozen uit verschillende materialen voor optima...

De Schneider Electric IMT30A is een flowtransmitter voor gebruikt met magnetische flowbuizen,zoals de 8400A, 8500A, 9500A, 9600A en 9700A serie. De IMT30A vormt het signaal van een magnetische flowbuis om naar een 4-20mA, Hart, Modbus of pulse-uitgang. De IMT30A is geschikt voor veilige zones en kan worden geleverd met of zonder display.

De Schneider Electric IMT31A is een flowtransmitter voor gebruikt met magnetische flowbuizen,zoals de 8400A, 8500A, 9500A, 9600A en 9700A serie. De IMT31A vormt het signaal van een magnetische flowbuis om naar een 4-20mA, Hart, Modbus, Foundation Fieldbus, of Profibus PA en DP. De IMT31A is geschikt voor explosieveilige zones (Ex i) als deze wordt gecombineerd met de 9500A of 96700A flowbuizen.

De Schneider Electric IMT33A is een explosieveilige flowtransmitter voor gebruikt met de 9500A, 9600A en 9700A serie magnetische flowbuizen. De IMT33A vormt het signaal van een magnetische flowbuis om naar een 4-20mA, Hart, Modbus, puls of Foundation Fieldbus. De IMT33A is geschikt voor explosieveilige zones (Ex d) volgens ATEX, IECex, FM en CSA.

De 84CW serie vortex massaflowmeter met wafer-aansluiting is een aanvulling op de Schneider Electric (voorheen Foxboro) familie van intelligente, krachtige vortex flowmeters. De 84CW serie is verkrijgbaar met 4 tot 20 mA, HART7 en of Modbus communicatie en kan optioneel worden uitgerust met temperatuurcompensatie voor massaflowmeting van verzadigde stoom (saturated steam) en vloeistoffen. Da...

The 84CN series vortex mass flow meter with threaded connection complements Schneider Electric (formerly Foxboro) family of intelligent, powerful vortex flowmeters. The 84CN series is available with 4 to 20 mA, HART7 and or Modbus communication and can optionally be equipped with temperature compensation for mass flow measurement of saturated steam and liquids. In addition, the Foxboro 84CN fea...

De 84CS serie vortex massaflowmeter met sanitaire aansluiting voor de farmeceutische en voedingsmiddelenindustrie is een aanvulling op de Schneider Electric (voorheen Foxboro) familie van intelligente, krachtige vortex flowmeters. De 84CS serie is verkrijgbaar met 4 tot 20 mA, HART7 en of Modbus communicatie en kan optioneel worden uitgerust met temperatuurcompensatie voor massaflowmeting va...

The 9600A series of magnetic flowmeters have been specially developed for use in the pharmaceutical and food industry. The 9600A series flowmeters are 3A, FDA and EHEDG certified for hygienic application, as well as ATEX, FM and CSA for explosion-proof application. The magnetic flow meters can communicate via Hart, Foundation Fieldbus or Modbus. Versions are available for pipe diameters from 2....

Barksdale has a wide range of flow switches for oil or water. You have the choise of twelve models, each with different process connections, different ranges and pressure limits. The flow switches are available with or without indication.

The Flowline FT10-GT10 is available in liquid and gas sensors, the general purpose flow switch provides reliable low or no-flow detection of relatively clean, non-coating media with a relay output. Liquid examples include water and acetic acid. Available in Polypropylene and PVDF, the short flow sensor is used in pipe or ducting from 1/2" to 1,5", and the long flow sensor is used in 2" and up....

Rugged and reliable the Series V4 Flotect flow switch operates automatically to protect equipment and pipeline systems against damage from reduction or loss of flow. The V4 is time tested being installed in thousands of pipelines and processing plants around the world. A unique magnetically actuated switching design gives superior performance. There are no bellows, springs, or seals to fail. In...

Surprisingly compact, the series V6 Flotect Flow Switch is engineered to specifically monitor liquid, gas, or airflows. Operation is simple and dependable with no mechanical linkage as the flow switch is magnetically actuated. Easy installation, simply insert the tee in the pipline and complete electrical connections. Tees are available from 1/2? to 2?, with bushings added the unit is easily ad...

The FS2 series is a vane switch for flow detection in water pipes. These flow switches can be used as flow detection in cooling systems and central heating systems in building automation. The switch can be used to detect whether or not there is flow in a water pipe to start or stop the operation of a pump. The FS2 series has a brass threaded connection and the vane is made of stainless steel.

Max Machinery P001 Series Piston Flow Meters work on the positive displacement principle. This principle measures flow based on a fixed amount of pistons, which measure these flowmeters very accurately. The P001 is designed for a very low flow of 0.005 ml per minute. The piston flow meters are suitable for hydrocarbon based liquids and can exhibit very high pressures and temperatures.

The FineTek EPD30 electromagnetic flowmeter offers industry a wide range of designs to meet even the most demanding process applications in diverse sectors such as chemistry, energy, oil and gas, metal and mining. The powerful transmitter is easy to use and delivers the output signal that meets your needs. EPD30 offers a versatile, reasonably priced, accurate flowmeter for your applications. Th...

The Dwyer IEF series electromagnetic flow transmitter is an adjustable flow meter with electromagnetic technology that accurately and reliably measures a fluid velocity. The IEF series is specifically designed to deliver superior performance in combination with easy installation and use. The IEF flow meter is adjustable for pipe sizes from 100 to 900 mm and offers various output signals, includ...

The Foxboro CFT51 series digital Coriolis Mass Flow and Density Transmitter is an improvement of the CFT50 flow meters that introduced a completely new technology in the field of coriolis flow measurement. In combination with a Foxboro CFS10 or CFS20 flow tubes, the CFT51 series forms a mass flow and density meter. The digital signal processing (DSP) offers improved flowmeter performance and ad...

The Foxboro CFS10 and CFS20 mass flow tubes form a Coriolis mass flow measurement together with the CFT51 series Coriolis transmitter. The principle of Coriolis acceleration is used, with which real mass flow measurements of liquids can be carried out directly, without the need for a separate temperature, pressure or density meter. The CFS10 has a single flow tube and is available in diameters...