Applications

Series 8000 is mechanical pressure switches in diaphragm or piston design. The successors of the product lines XTM, XTK, X1T and 96200 have the additional advantage.6 pressure ranges allow precise setting between 0,4 to 6 bar and from 80 to 600 bar. The housing is made of aluminium diecast 230 with a protection class IP¨65. The 8000-series are ideal for OEM, mobile- and industrial-hydraulics an...

The series 9000 switches with a piston-type spring-loaded pressure element and snap-acting microswitch are characterized by their compact design. The housing is made of aluminium and has a protection class IP65. 3 pressure ranges allow precise setting between 6 and 400 bar. The switch is ideal for OEM applications, hydraulic and pneumatic systems.

Barksdale has a wide range of flow switches for oil or water. You have the choise of twelve models, each with different process connections, different ranges and pressure limits. The flow switches are available with or without indication.

The general purpose ultrasonic level transmitter provides continuous level measurement up to 18.0' (5.5m) with a 4-20 mA signal output, and is configured via the free Webcal software. The level sensor has 4 programmable relays with selectable hysteresis and fail-safe logic. The embedded level controller can lower cost by replacing external control hardware. This non-contact liquid level sensor...

The MFS flowsensor is a patented, self-averaging flow-sensor for all kinds of ventilation ducts. The average of air flow is measured across the whole length of the sensor. Gives a 2,5 times higher differential pressure than a Prandtl tube measuring. Easy to install in existing ducts. Lengths from 100 to 2500 mm.

The UNS-VA/SB4 is a rugged and sturdy bilge level switch made from stainless steel. It is especially designed for shipbuilding industry, offshore, oil tanks and sewage works. The UNS-VA/SB4 has 4 standard cable lengths : 1, 5, 10 and 15 meter.

The UNS-VA/SB5 with test function, is a rugged and sturdy bilge level switch made from stainless steel. It is especially designed for shipbuilding industry, offshore, oil tanks and sewage works. The UNS-VA/SB5 has 4 standard cable lengths : 1, 5, 10 and 15 meter.

The Lufft WS600-UMB is a product in the "WS" family compact weather stations. This station is equipped with a temperature, relative humidity, air pressure and Doppler radar rainfall measurement. The smart rain gauge "sees" whether it is raining or snowing. This rain gauge is maintenance free and is heated against frost. The integrated ultrasonic wind sensor measures wind speed and direction wit...

The Lufft weather stations can be fully customized by HITMA. We can mount the weather stations on a mast with optional features such as light intensity measurement, solar measurement and lightning protection. Below are some examples, there is much more customization possible.

The Barksdale BPS3000 series is an electronic pressure switch with optional transmitter output. The pressure switch is equipped with a LED display and is fully rotatable in the ideal position. The display and electrical connection can be rotated separately. In addition to the standard models the BPS300 can also be equipped out with other process connections, analog output or EPDM gaskets.

The BTS3000 electronic temperature switch series offers a compact, reliable and flexible temperature measurement. The BTS3000 can be used as a thermostat, but can also optionally be equipped with an analog output, so that it also functions as a temperature transmitter. The temperature sensors can be put together according to their wishes. Different measuring ranges, process connection and plug-...

The Mini Bypass Level Indicator is the "light" version in the family available with lengths up to 3000 mm, medium temperatures up to 150 °C and pressures up to 16 bar max.

The JRI MySirius application allows fully customizable management thanks to a dashboard and modules adapted to needs and jobs of the users. The data transmitted by the LoRa® SPY connected temperature sensors are easily overseen and managed on - full-web platform. The interface is user-friendly, intuitive and customizable with different indicators and favorites offering a data management adap...

The Barksdale USE3000 float transmitter is ideal as a top mount level transmitter assembly. The robust float switches has a series of reed contacts along the stem which generates a variable resistor 100 khm output. Optionally, this can be converted to 4-20 mA ouput. The USE3000 can be custom manufactured to a maximum length of 3000 mm. Longer lengths (up to 6000 mm) and ATEX certified versions...

The BLS3000 is an electronic version of a traditional float switch. On the clear LCD display you can read the current level and with the built-in PNP contacts you can monitor a low or high level. In addition to the switching outputs, there are also versions with an analogue 4-20 mA, or 0-10 Volt output. The BLS3000 can be used as a float switch, but also as a level transmitter.

The Barksdale BDS3000 series is an electronic differential pressure switch, designed for monitoring (hydraulic) filter systems. There are versions with one or two switching contacts, but also with an analog output, so that it can be used as a differential pressure transmitter. There are different measurement ranges from 350 mbar to 35 bar. The BDS3000 is suitable as filter monitoring, but can a...

The Barksdale Series 7000 is the ideal solution for precise pressure control in industrial environments. These robust pressure switches are specifically designed to withstand harsh conditions, making them perfect for applications in mechanical engineering, hydraulics, and process industries.

The LEKA24 series signal lamps are ideal for simple signaling of isolation rooms and clean rooms. The red and green lights can be switched with a differential pressure switch, such as the PST series. But can also be connected to the relay contacts of the Micatrone MF-PFA series differential pressure transmitters, or the multifunctional Kimo C310 transmitters.

Dwyer Magnehelic gage for high accuracy, guaranteed within 2% of full scale and for the wide choice of 81 models available to suit your needs precisely. Using Dwyer's simple, frictionless Magnehelic gage movement, it quickly indicates low air or noncorrosive gas pressures, either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer fl...

The Model AAFS air flow switch provides excellent sensitivity and reliability at a very reasonable price. Quality features include a rugged die cast body, stainless steel vane and SPDT snap switch. Unit is field adjustable from 400-1600 FPM. Mounting is fast and simple,with only two screws needed. Vane fits 6 inch or larger ducts.

The Series ADPS Adjustable Differential Pressure Switch is designed for pressure, vacuum, and differential pressures. The adjustment knob allows changes to the switching pressure to be made without a pressure gage. The ADPS is available with settings from 20 Pa up to 5000 Pa. The compact size, adjustment knob and low cost make the ADPS the perfect choice for HVAC applications.

The Kimo PST series is a differential pressure switch with indicator. The PST is ideal for filter monitoring applications. The status LED indicates if an alarm level is exceeded and the current pressure is shown on the display. The installation is very easy because the housing can be mounted in two parts making it ideal for installers.

The Kimo CPE310 differential pressure transmitter is the successor of the CPE300. The transmitter can be flush mounted in a wall and can be calibrated using special connectors from the front. The CPE310 has an internal buzzer with acceptance and delay. Optionally, an external sensor for temperature and humidity, can be connected, the display then scrolls between the values​​. The CPE310-S has 3...

Micaflex MF-P / MF-PD is a pressure transmitter designed for low positive, negative and differential pressure in air-handling and ventilation systems where low pressure measuring is needed. They have an adjustable damping and a choice between a 0-10 V or 4-20 mA output. All transmitters can be delivered with or without a LCD display.