Level transmitters

The 4000 series from Klay-Instruments is a complete line of intelligent pressure transmitters that can also be used as level transmitters and are microprocessor-controlled. These transmitters are easily configurable using a single programming button and have a stainless steel housing. Thanks to the unique ‘One Touch Programming Button’, zero and span can be set without applying pressure, and a…

The 2000 series from Klay-Instruments is a complete line of ‘intelligent’ pressure transmitters that can also be used as level transmitters. These transmitters are microprocessor-controlled and easily adjustable via three push buttons, all housed in a full stainless steel casing. The display and buttons make the transmitter easy to configure. The pressure transmitters are equipped with a flush…

The LevelWave LR01 is designed to perform continuous level measurement in a wide range of industries and applications. Foxboro is known for more than 50 years of experience in level measurement as a leading supplier of extremely robust, durable and reliable level measurements. Unaffected by changes in temperature, specific gravity, pressure and with no need to recalibrate, offering a highly avail…

The Foxboro Levelstar 244LVP series consists of level meters with a displacement (buoyancy) measurement principle. This principle is based on the law of Archimedes that states that the upward force is equal to the weight of the displaced liquid. This makes the LevelStar also suitable for measuring level differences between two different liquids (interface). The LevelStar series immediately measur…

The Foxboro Levelstar 244LD series consists of level meters with a displacement (buoyancy) measurement principle. This principle is based on the law of Archimedes that states that the upward force is equal to the weight of the displaced liquid. This makes the LevelStar also suitable for measuring level differences between two different liquids (interface). The LevelStar series immediately measure…

The 167LP pneumatic buoyancy transmitter is designed to perform measurements for liquid level, interface level and density of liquids. The measurement is based on the Archimedes buoyancy principle that works without any moving parts. The 167LP provides a 3-15 psi (0,2-1 bar) pressure output. Beacause of the fully pneumatic design without electronics it can withstand extreme high and low temperatu…

The Flowline UG01 series reflective ultrasonic level transmitter offers continuous level measurement up to 3 meters with a 4-20 mA analog signal output and four relay contacts. The UG01 series is configured via the user-friendly WebCal software. The non-contact liquid level sensor is equipped with our patented Reflective Technology ™ that delivers reliable level measurement even with condensation…

The Flowline LR30 series general purpose 26 GHz. pulse radar level transmitter provides continuous level measurement up to 98.4’ (30m) with a 4-20 mA signal output, and is configured via its remote push button display module. The non-contact liquid level sensor is intended for industrial wastewater, municipal storm or sewer lift station, reservoir, river, canal or open channel applications locate…

The general purpose ultrasonic level transmitter provides continuous level measurement up to 18.0' (5.5m) with a 4-20 mA signal output, and is configured via the free Webcal software. The level sensor has 4 programmable relays with selectable hysteresis and fail-safe logic. The embedded level controller can lower cost by replacing external control hardware. This non-contact liquid level sensor is…

The general purpose ultrasonic level transmitter provides continuous level measurement up to 9.8' (3m) with a 4-20 mA signal output, and is configured via our free WebCal software. The level sensor has 4 programmable relays with selectable hysteresis and fail-safe logic. The embedded level controller can lower cost by replacing external control hardware. This non-contact liquid level sensor is id…

The general purpose ultrasonic level transmitter provides continuous level measurement up to 49.2" (1.25m) with a 4-20 mA signal output, and is configured via our free WebCal software. The embedded level controller can lower cost by replacing external control hardware. This non-contact liquid level sensor is ideally suited for corrosive, sticky or dirty liquids, and is widely selected for small d…

The EG Series is a magnetostrictive level transmitter for accurately measuring levels of a wide range of fluids. This measurement principle sends a frequency pulse by the voice of the sensor with which it detects the magnitude of the magnet in the float. This modern measurement technique provides higher accuracy than traditional float level transmitters. The EG series can be performed with a sing…

The Finetek EE300 series electro mechanical level measurement provides solutions for the measurement of of bulk and powders levels where a radar or ultrasonic measuring principle does not work. The EE300 series lowers a weight along a cable and detects when it touches the surface. The length of the cable is then equal to the level. This process repeats and an analog output signal is generated, th…

The FineTek EB5200 capacitance level transmitter measures a level by the difference in capacity between the probe and a metal tank wall. A reference probe is needed in case of non metalic tanks. The electronic capacitance measurement is not affected by noise, dust, fog and temperature changes.

The JFR series, developed by Finetek, is a 26 GHz radar level transmitter that detects liquid, powder and bulk levels with contact. The 5-digit display shows level linear, but can also be programmed with a curve, for silo's or spherical shaped tanks. There are versions for normal liquids and solids, but also specifically for corrosive liquids. In addition to the 26GHz embodiment, there is also th…

The Echowave LG10-11 series radar level transmitters are available with three types of probes. The liquid level transmitter continuously measures the level up to 5.5 m with a 4-20 mA output signal and is configured with the free WebCal software. This liquid level sensor is used in non-turbulent environments with foam, vapor, condensation and at high temperature or pressure. Select the rod or cabl…

The MBLT miniature submersible level transmitter is only 0.63˝ in diameter making it ideal for level monitoring in well and borehole applications with 4 to 20 mA or 0 to 5 V output. Designed for years of trouble free service, the MBLT has a welded 316 SS body and 316 SS nose cap. Body top is also 316 SS and tapered to prevent damage or snares when pulling the unit out of the installation. Feature…

The Dwyer Series PBLT2 is a robust level transmitter for measuring liquid levels in water, wastewater, and slurries. T…

The Barksdale USE3000 float transmitter is ideal as a top mount level transmitter assembly. The robust float switches has a series of reed contacts along the stem which generates a variable resistor 100 khm output. Optionally, this can be converted to 4-20 mA ouput. The USE3000 can be custom manufactured to a maximum length of 3000 mm. Longer lengths (up to 6000 mm) and ATEX certified versions ar…

The BLS3000 is an electronic version of a traditional float switch. On the clear LCD display you can read the current level and with the built-in PNP contacts you can monitor a low or high level. In addition to the switching outputs, there are also versions with an analogue 4-20 mA, or 0-10 Volt output. The BLS3000 can be used as a float switch, but also as a level transmitter.