Dwyer Instruments
Search results: 1-48 of 88
CO2 en luchtvochtigheidstransmitter voor ruimtemontage serie CDTR-E
| SKU | 2025883 |
De CDTR-E serie is een kooldioxide (CO2) en luchtvochtigheid transmitter voor ruimtemontage in één. De CO2-transmitter meet het CO2-gehalte, de relatieve vochtigheid en optioneel ook de temperatuur in de ruimte. De meetwaardes kunnen met analoge signalen worden doorgestuurd naar het gebouwbeheersysteem om hiermee de ventilatie aan te sturen. De CDTR-E serie is er in meetbereiken van 2000 een 5000…
CO2-transmitter voor kanaalmontage serie CDT-D
| SKU | 2023306 |
De CDT-D serie is een koolmonoxide (CO2) transmitter voor kanaalmontage. De CO2-transmitter meet het CO2-gehalte en optioneel ook de temperatuur in een luchtkanaal. De meetwaardes kunnen met analoge signalen worden doorgestuurd naar het gebouwbeheersysteem om hiermee de ventilatie aan te sturen. De CDT-D serie is er in meetbereiken van 2000 een 5000 ppm CO2. Optioneel kan de CO2-transmitter worde…
CO2-transmitter voor ruimtemontage serie CDT-E
| SKU | 2024971 |
De CDT-E serie is een kooldioxide (CO2) transmitter voor ruimtemontage. De CO2-transmitter meet het CO2-gehalte en optioneel ook de temperatuur in de ruimte. De meetwaardes kunnen met analoge signalen worden doorgestuurd naar het gebouwbeheersysteem om hiermee de ventilatie aan te sturen. De CDT serie is er in meetbereiken van 2000 een 5000 ppm CO2. Optioneel kan de CO2-transmitter worden voorzie…
Carbon monoxide transmitter for room monitoring series CMT200
| SKU | 2021799 |
The CMT200 series carbon monoxide transmitters from Dwyer are ideal for use in underground parking garages, workshops, and boiler rooms. The CO detector provides an analog output signal that can be read by a building management system, allowing ventilation to be activated when carbon monoxide levels become too high.
Differential pressure transmitter for DIN rail mounting series 616KD
| SKU | 2024318 |
The Dwyer 616KD differential pressure transmitters are compact and designed for DIN rail mounting. The 616KD series is available in various accuracies, up to 0.25%, and in a range of measurement spans. With simple calibration buttons, you can easily set the zero and span points, saving time during installation and maintenance.
Dwyer ATEX approved differential pessure switch series AT1ADPS
| SKU | AT1ADPS |
The ATEX approved AT1ADPS differential pressure switch is designed for overpressure, underpressure and differential pressure applications in potentially hazardous areas. The large adjustment knob with scale makes it very easy to set the switching point. The AT1ADPS differential pressure switch is available in different switching ranges between 20 and 4000 Pa. The aluminum flame proof ATEX housing…
Dwyer ATEX differential pressure controller series AT2DH3
| SKU | AT2DH3 |
The ATEX certified AT2DH3 series Digihelic® differential pressure controller is a 3-in-1 instrument that consists of a digital differential pressure gauge, relay contacts for alarms, or on-off control and a transmitter output. The AT2DH3 can also be used to measure air velocities and flow in combination with a pitot tube. The AT2DH3 has an analogue 4-20 mA output and two SPDT relay contacts with…
Dwyer ATEX differential pressure switch series 1950G
| SKU | 2010783 |
The Model 1950G Explosion-Proof Switch combines the best features of the popular Dwyer® Series 1950 Pressure Switch with the benefit of natural gas compatibility. Units are rain-tight for outdoor installations, And are ATEX approved CE ATEX II 2G Exd IIB+H2 T6. Adjustment to the set point of the switch can be made without disassembly of the housing.
Dwyer ATEX differential pressure switch series H3
| SKU | 2018792 |
Explosion-proof, heavy duty, industrial pressure switch which provides sensitivity to differential pressure as low as 25 mbar up to 14 bar with a max. static pressure of 100 bar. This unit has a standard aluminium pressure chamber but is also available in 316 stainless steel. Approvals : UL, CSA, CE and ATEX.
Dwyer ATEX differential pressure transmitter series AT2MS
| SKU | AT2MS |
The ATEX-certified AT2MS series Magnesense® differential pressure transmitter is an extremely versatile transmitter for monitoring pressure and air velocity in potentially hazardous areas. The AT2MS transmitter can be set up in English or metric ranges and can be extended with an LCD screen. A square root output can be set for use with pitot tubes and similar flow sensors. The flameproof ATEX hou…
Dwyer ATEX/IECEx Differential Pressure Controller Series AT-DHC
| SKU | ATDHC |
The Dwyer Series AT-DHC is the successor to the well-known AT2DH3 differential pressure controller. This new generatio…
Dwyer CO2 transmitter for industry, animal husbandry and greenhouses series CDWP
| SKU | CDWP |
The Dwyer CDWP series consists of inductive CO2 transmitters for, for example, livestock farming (chicken barns), technical areas, monitoring of CO2 cooling systems and greenhouses. The CDWP measures the carbon dioxide content with an infrared (NDIR) measuring cell with a long lifespan. This sensor technology offers the highest accuracy compared to automatic baseline correction (ABC logic), which…
Dwyer CO2 transmitters series CDT
| SKU | W-9000392 |
The Dwyer CDT series CO2 transmitters are equipped with an NDIR (infrared) sensor. The transmitters are available in a wall-mounted version and in a version for duct mounting. Optionally, the transmitters are also available with a temperature output and SPST relay contact. Unique for this CO2 measurement is that it can also be used for rooms that are used 24 hours a day. Other sensors use the per…
Dwyer Capsuhelic differential pressure gage series 4000
| SKU | 2002149 |
The Capsuhelic gage is designed to give fast, accurate indication of differential pressures. The gage may be used as a readout device when measuring flowing fluids, pressure drop across filters, liquid levels in storage tanks and many other applications involving pressure, vacuum or differential pressure.
Dwyer Critical room pressure monitor series RPMC
| SKU | RPMC |
The Dwyer pressure monitor series RPMC is designed for critical applications with low differential pressures. The transmitter uses a capacitive pressure sensor to achieve extremely high accuracy. There is a choice between ± 0.25% or ± 0.5% RSS. The RPMC has the same dimensions as the Magnehelic which simplifies an upgrade in the field. The pressure monitor is suitable for applications requiring s…
Dwyer High-Accuracy Magnehelic Pressure gauge Series 2000-HA
| SKU | 2024761 |
The 2000-HA Series High Accuracy Magnehelic® pressure differential manometer is twice as accurate as the standard Magnehelic® manometer. The High Accuracy Magnehelic® pressure differential manometer provides a mirrored overlay to eliminate any parallax errors when measuring. A six-point calibration certificate is included with any high-precision model. The robust IP67 housing (front) helps to com…
Dwyer MagneSense differential pressure transmitter series MS
| SKU | MS |
The Series MS Magnesense Differential Pressure Transmitter is an extremely versatile transmitter for monitoring pressure and air velocity. This compact package is loaded with features such as: field selectable english or metric ranges, field upgradeable LCD display, adjustable dampening of output signal (with optional display) and ability to select a square root output for use with pitot tubes an…
Dwyer Magnehelic differential pressure gauge series 2000
| SKU | 2001509 |
Dwyer Magnehelic gage for high accuracy, guaranteed within 2% of full scale and for the wide choice of 81 models available to suit your needs precisely. Using Dwyer's simple, frictionless Magnehelic gage movement, it quickly indicates low air or noncorrosive gas pressures, either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer flui…
Dwyer Magnehelic mounting accessories
| SKU | 2001498 |
The Dwyer Magnehelic can be mounted in different ways. By default, the instrument is equipped with all the accessories needed to mount the Magnehelic into a round hole in a panel. In addition, there are various accessories for mounting on a round tube, in a (system) wall, or with various brackets in a wall cabinet.
Dwyer Magnesense differential pressure transmitter series MSX Pro
| SKU | MSX Pro |
The Dwyer Magnesense Series MSX Pro differential pressure transmitter is the professional differential pressure transmitter that meets rigorous industry standards with innovative product design. The instrument has exceptional stability for use in critical building applications with the versatility of our original series Magnesense transmitters. Pressure ranges in Pa, mmH2O, and inWC are available…
Dwyer Mini-photohelic differential pressure switch series MP
| SKU | 2013247 |
The MP Mini-Photohelic differential pressure switch/gage combines the time proven Minihelic II differential pressure gage with two SPDT switching setpoints. The Mini-Photohelic gage is designed to measure and control positive, negative, or differential pressures consisting of non-combustible and non-corrosive gases. Gage reading is independent of switch operation. This extremely compact switch/g…
Dwyer Minihelic differential pressure gage series 2-5000
| SKU | 2001533 |
The Minihelic is a small differential pressure manometer, suitable for many of the same applications as the Magnehelic gage where the greater accuracy, sensitivity, and higher and lower differential pressure ranges of the Magnehelic gage are not required. It can safely operate at total pressures up to 200 kPa. With the housing molded from mineral and glass filled nylon and the lens molded from ac…
Dwyer Modbus and BACnet CO2, temperature and RV transmitter series CDTA
| SKU | CDTA |
The Dwyer CDTA series carbon dioxide meter combines three measurements in one compact housing. The CDTA measures CO2, humidity and temperature, but can also be used as a set point generator. Communication with a GBS or PLC is via Modbus®, or BACnet, which can be chosen in the field. To facilitate installation, the RS485 address can be set using dip switches. The CDTA uses a non-dispersive infrare…
Dwyer Photohelic differential pressure switch and gage series 3000MR
| SKU | 2016428 |
The series 3000MR Photohelic switch/gages combine the functions of a precise, highly repeatable differential pressure switch with a large easy-to-read analog pressure gage employing the durable, time-proven Magnehelic gage design. The Photohelic has 2 switch functions. Switch setting is easy to adjust with large external knobs on the gage face. Gage reading is unaffected by switch operation — wil…
Dwyer RHPX Series Humidity and Temperature Transmitters
| SKU | 8007444 |
The Dwyer RHPX series offers a reliable solution for simultaneously measuring relative humidity and temperature in HVAC and building management systems. By combining two essential parameters in one compact transmitter, this device helps improve energy efficiency while optimizing occupant comfort.
Dwyer Room pressure monitor series RPME
| SKU | RPME FlexiSense |
The Dwyer pressure monitor series RPME is designed for critical applications with low differential pressures. The transmitter uses a piezo pressure sensor to achieve high accuracy. There is a choice between ±0.5% or ±1% RSS. The RPME has the same dimensions as the Magnehelic which simplifies an upgrade in the field. The pressure monitor is suitable for applications requiring strict pressure monit…
Dwyer Room status monitor series RSMC StabiliSense
| SKU | RSMC StabiliSense |
The Dwyer RSMC Room Status Monitor Series is designed for critical applications with low differential pressures that also require immediate local visibility. The 4.3” full color touchscreen can be configured to measure positive or negative pressure in, for example, cleanrooms, hospitals, isolation rooms and laboratories. The Dwyer RSME Room Status Monitor is a complete solution with a touchscreen…
Dwyer Room status monitor series RSME
| SKU | RSME |
The Dwyer pressure monitor series RPMC is designed for critical applications with low differential pressures which must also be directly visible locally. The 4.3” full color touchscreen can be configured to measure positive or negative pressure in, for example, cleanrooms, hospitals, isolation rooms and laboratories. The Dwyer RSME Room Status Monitor is a complete solution featuring a touchscree…
Dwyer Series PBLT2 submersible level transmitter for liquids
| SKU | 2029314 |
The Dwyer Series PBLT2 is a robust level transmitter for measuring liquid levels in water, wastewater, and slurries. T…
Dwyer Smart air speed transmitter series AVUL
| SKU | 2025122 |
The Dwyer AVUL series measures air speed and volume flow in ventilation ducts. The AVUL works on a hot wire principle with special coating for a long life. There may be chosen for English or metric units. Furthermore, there are analogue outputs, but also versions for Smart Buildings with BACnet or Modbus communication.
Dwyer U-tube liquid column manometer series Flex-Tube
| SKU | 2001547 |
These inexpensive manometers measure positive, negative and differential pressures. Dwyer Flex-Tube U-Tube Manometers combine the inherent accuracy of the simple "U" Tube with the durability of tough, long-lasting plastic construction. Series 1221 Manometer, the simplest, lowest cost basic U-gage. Series 1222 Manometer, alll the features of the 1221 plus magnetic clips. Series 1223 Manometer, the…
Dwyer aan-uit of PID temperatuurregelaar serie 4C
| SKU | 4C |
De Serie 4C 1/4 DIN Temperatuurregelaar: Eenvoudige installatie, nauwkeurige PID-regeling, diverse uitgangen en configureerbare alarmen. Ideaal voor ovens, koelers en meer.
Dwyer air velocity transmitter for low velocities series AVLV
| SKU | AVLV |
The Dwyer AVLV series is an air velocity transmitter for very low velocities below 2 m/s. The AVLV has universal inputs for monitoring equipment and the output range can be configured by local DIP switches. Process values can be monitored locally through the optional integral display or the portable remote display tool. The air velocity transmitter is suitable for quality intensive environments s…
Dwyer averaging flow sensor series PAFS-1000
| SKU | 2019461 |
The Series PAFS-1000 Lightweight Flow Sensor is ideal for sensing differential pressure in the inlet section of variable air volume terminal units and fan terminal units. Units can also be used to sense differential pressure at other locations in the main or branch duct systems.
Dwyer broken bag detection particle transmitters series PMT2
| SKU | W-9000428 |
The Dwyer PMT2 series is a particle transmitter designed for broken bag detection (fiter leak detection). The special electrostatic induction technology detects particles that flow past the sensor and converts this into a 4 to 20 mA signal based on the concentration of these particles. The PMT2 offers 6 sensitivity ranges that allow the user to choose the range that best fits the application. The…
Dwyer calibration pump series A-396A
| SKU | 2001500 |
Serves as pressure source to calibrate gages and transmitters or to set pressure switches. Use with manometer or other pressure standard. Generate pressures from a fraction of an inch w.c. to 72 psig (5 bar). Includes barbed fitting, tee connector and three 36? lengths of vinyl tubing.
Dwyer carbon monoxide CO transmitter series GSTA
| SKU | 2023238 |
The Dwyer GSTA series is a carbon monoxide (CO) transmitter for room or channel mounting. The GSTA series can be selected with and without display and has a 0-10 V or 4-20 mA output. Optionally there is an implementation with Modbus or BACnet communication.
Dwyer differential pressure switch series 1910
| SKU | 2001571 |
The most popular differential pressure switch combines advanced design and precision construction to make these switches able to perform many of the tasks of larger, costlier units. Designed for air conditioning service, they also serve many fluidics, refrigeration, oven and dryer applications. For air and non combustible compatible gases, Series 1910 switches have set points from 18 to 400 Pa an…
Dwyer differential pressure switch series 1950
| SKU | 2001577 |
Model 1950 explosion proof pressure pressure switch combines the best features of the popular1900 series with an integral explosion-proof and weatherproof housing, making it an exceptional value for either application. It is CE, UL and CSA listed, FM approved for use in Class I, Div 1, Groups C and D, Class II Groups E, F, and G and Class III hazardous atmospheres (NEMA 7 & 9), Raintight NEMA 3 (…
Dwyer differential pressure switch series ADPS
| SKU | 2016729 |
The Series ADPS Adjustable Differential Pressure Switch is designed for pressure, vacuum, and differential pressures. The adjustment knob allows changes to the switching pressure to be made without a pressure gage. The ADPS is available with settings from 20 Pa up to 5000 Pa. The compact size, adjustment knob and low cost make the ADPS the perfect choice for HVAC applications.
Dwyer differential pressure transmitter series 605
| SKU | 2001478 |
The Series 605 Magnehelic Indicating Transmitter provides for both visual monitoring and electronic control of very low differential pressure. The Series 605 is ideal for control applications in building HVAC systems The easily read dial gage is complimented by the two-wire, 4-20 mA control signal utilizing the timeproven Dwyer® Magnehelic® gage mechanical design and Series 600 transmitter techno…
Dwyer differential pressure transmitter series 629C
| SKU | 2025846 |
The Series 629C Differential Pressure Transmitter monitors differential pressure of air and compatible gases and liquids with 0.5% accuracy. The design employs dual pressure sensors converting pressure changes into a standard 4-20 mA output signal for two wire circuits. Small internal volume and minimum moving parts result in exceptional response and reliability.
Dwyer differential pressure transmitter series DM-2000
| SKU | DM-2000 |
The Dwyer series DM-2000 differential pressure transmitter senses the pressure of air and compatible gases and sends a standard 4-20 mA output signal. The DM-2000 housing is specifically designed to mount in the same diameter cutout as a standard Magnehelic gage. A wide range of models are available factory calibrated to specific ranges. Pressure connections are inherent to the glass filled plast…
Dwyer differential pressure transmitter with flow calculation and alarms series DH3
| SKU | 2017467 |
The Dwyer DH3 series Digihelic differential pressure gauge is a 3-in-1 instrument with a digital display, relay contacts and a transmitter output, all packed in the popular Photohelic housing. By combining these 3 functions, you can reduce different instruments to one product, saving you inventory, installation time and money. The DH3 controller is the ideal instrument for pressure (difference) m…
Dwyer digital manometer series 490A
| SKU | W-9000019 |
Series 490A Digital Manometers are versatile, hand-held, battery operated manometers available in several basic ranges for positive or positive differential pressure measurement and can tolerate most liquid media compatible with 316LSS. A memory function allows storage of up to 40 readings.
Dwyer digital pressure gage and transmitter series DPG-200
| SKU | 2015878 |
The Series DPG-200 digital pressure gage has a precise ±0.25% full scale accuracy. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commonly produced with analog gages. The DPG-200 is packaged in a durable extruded aluminum case (IP66). The unit is powered by 12-24 VDC/VAC and contains two alarm set points along with a 4-20 mA process outp…
Dwyer digital pressure gage series DPG
| SKU | 2019205 |
The Series DPG has a high ±0.25% full scale accuracy. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commonly produced with analog gages. Series DPG is battery powered and has an auto-shut off to conserve battery life. Battery life, on average, will last 2000 hours. A 4 button key pad allows easy access to features without the need to wo…