Kimo Sauermann

The AQ110 is a reliable and accurate portable instrument for measuring air quality (CO2). Standard functions are: min, max, hold, self-calibration, adjustable automatic shut-off and backlight. The AQ110 CO2-meter is supllied with a transport case and calibration certificate. The AQ 110 S with soft case and adjusting certificate.

The Kimo ATE-310 display can display up to three measured values of other instruments. On each channel the limit values can be set for audio-visual alarm. The buzzer has an acceptance (reset) function. The display is flush mount, making it ideal for use in clean rooms and operating rooms. The universal input accepts 0-10V and 4-20mA signals and allows the measurement values to show alternately...

A reliable and accurate portable instrument for measuring rotations. Available with an optical probe and a contact adaptor. Standard functions are: min, max, hold, self-calibration, adjustable automatic shut-off and backlight. Each instrument is supllied with a transport case, calibration certificate (model E) or adjusting certificat (model S)

The Kimo HD110 is a reliable and accurate handheld meter for measuring humidity, temperature and dewpoint. Standard functions: min, max, hold, auto power off and choice of units. Especially for the food industry, there is a white colored design. Each instrument is supplied in a sturdy carrying case and calibration report (HD110) or soft case and test certificate (HD110 S).

The HP range of inclined liquid column manometers, measure slight variations in pressure, depression or differential pressure of air or gas. The are particulary recommended for measuring overpressure in clean rooms, laboratories, aseptic rooms and laminar flows.

Infrared thermometer KIRAY 100 with dual laser sighting is a key tool to diagnose, inspect and check any temperature, with the advantage of using “no-contact” technology. You can safely measure surface temperatures of hot objects, dangerous or difficult to access. Perfect tool to take temperature in a house, a garage, a workshop, an office, a car, a kitchen et cetera.

The KT20 Series Button Data Loggers from Kimo are very compact and sharply priced. The button size data loggers can be used to record temperatures during transport, or storage.

The LV110 series offers three different vane probes for measuring air velocities. There are van probes of 14, 70 and 100 mm. Standard functions: min, max, hold, auto power off and choice of units. Each instrument is supplied in a sturdy carrying case and calibration report or test certificate (S models).

A reliable and accurate portable instrument for measuring pressure and differential pressure. Standard functions are: min, max, hold, self-calibration, adjustable automatic shut-off and backlight. Each instrument is supllied with a transport case, tubing, calibration certificate (model E) or adjusting certificat (model S).

A reliable and accurate portable instrument for measuring pressure and differential pressure and air velocity. (with pitot tube). Standard functions are: min, max, hold, self-calibration, adjustable automatic shut-off and backlight. Each instrument is supllied with a transport case, tubing, calibration certificate (model E) or adjusting certificat (model S)

KIMO offers a wide range of high-quality and accurate Pitot tubes, as per the AFNOR NFX 10-112 norm. These Pitot tubes, when being connected to a differential column / or needle / or electronical manometer, can measure the dynamic pressure of a moving fluid in a duct, and then can deduct its air velocity in m/s and its airflow in m3/h. These Pitot tubes are used in HVAC field, vacuum cleaning a...

Reliable and accurate handheld meter to measure air velocity and flow. The VT110 series has a hotwire sensor with a built-in temperature sensor. Standard functions: min, max, hold, auto power off and choice of units. Each instrument is supplied in a carrying case and calibration report or test certificate (S models).

The Kilog software is a comprehensive package for programming, readout and making reports for all Kistock series dataloggers. The software allows the measured values to be displayed in graphs and tables or exported to a spreadsheet. With the standard reporting feature complete measuring reports can be printed and provided with your own logo and information about the location where the measurem...

Convenient mounting box for wall mounting Kimo transmitters in the series CPE300. The BD300 can be sealed watertight into the wall prior to installing the CPE300. This makes the installation of the CPE300 series a piece of cake.

The Kimo PST series is a differential pressure switch with indicator. The PST is ideal for filter monitoring applications. The status LED indicates if an alarm level is exceeded and the current pressure is shown on the display. The installation is very easy because the housing can be mounted in two parts making it ideal for installers.

The Kimo CP110 series is a differential pressure transmitter with or without display. The CP111, CP112 and CP113 are ideal for filter monitoring applications with an analog output to a building management system. The installation is very easy and the housing can be mounted in two parts making it ideal for installers.

The Kimo CP110 series is a differential pressure transmitter with or without display. The CP114 and CP115 are ideal for filter monitoring applications with an analog output to a building management system. The installation is very easy and the housing can be mounted in two parts making it ideal for installers.

The Kimo CP210 is a differential pressure transmitter that can also be used as a flow transmitter in combination with the Debimo averaging pitot tubes or Micatrone MFS series flow sensors. The CP211 and CP212 have an automatic zero setting. The CP210 has a PT100 input for an additional temperature measurement.

The TST series temperature switches can be used as temperature sensors for controlling temperatures in rooms or ducts. The status LED indicates if an alarm level is exceeded and the display shows the current temperature. The installation is very easy and the housing can be mounted in two parts making it ideal for installers.

The Kimo TM110 series is a transmitter with or without display. The TM110 is ideal for use as a temperature measurement in rooms and air ducts for connection to a building management system. The installation is very easy and the housing can be mounted in two parts making it ideal for installers.

The Kimo TM210 series is a transmitter with or without display. The TM210 is ideal for use as a temperature measurement in rooms and air ducts for connection to a building management system. This temperature transmitter has an internal sensor and a PT100 input, or two PT100 inputs for measuring temperature differences.

The Kimo HST series humidity switches can be used as a humidistat in rooms or ducts. The status LED indicates if an alarm level is exceeded and the display shows the current relative humidity. The installation is very easy and the housing can be mounted in two parts making it ideal for installers.

The Kimo HM110 series is a transmitter with or without display. The HM110 is ideal to use as humidity measurement in air ducts and rooms for connection to a building management system. The installation is very easy and the housing can be mounted in two parts making it ideal for installers.

The Kimo TH110 series is a relative humidity transmitter with or without display. The TH110 is ideal to use as humidity and temperature measurement in rooms and air ducts for connection to a building management system. The installation is very easy and the housing can be mounted in two parts making it ideal for installers.

The Kimo TH210 series is a relative humidity transmitter with or without display. The TH210 is ideal to use as temperature and humidity measurement in air ducts and rooms for connection to a building management system. The transmitter calculates the absolute humidity, dew point, wet and dry bulb temperature. For temperatures up to 180°C stainless steel sensors are available. There are also seve...

The Kimo CTV110 is a series of air velocity transmitters with or without display. The CTV110 is ideal to use as flow measurement in air ducts, fume hoods and laminar flow cabinets for connection to a building management system. The installation is very easy and the housing can be mounted in two parts making it ideal for installers.

The Kimo CTV210 is a series of air velocity transmitters with or without display. The CTV210 is ideal to use as flow measurement in air ducts, fume hoods and laminar flow cabinets for connection to a building management system. The transmitter can be carried out with a standard stainless steel probe, or a special omni-directional probe.

Kimo COST series is a carbon monoxide switch with indicator. The COST is ideal to use as security against carbon monoxide poisoning. The status LED indicates if an alarm level is exceeded and the audio-visual alarm warns at a high concentration of CO. The installation is very easy because the enclosure can be mounted in two parts, making it ideal for installers.

Kimo CO2ST series is a carbon dioxide switch with indicator. The CO2ST is ideal to use as an alarm for CO2. The status LED indicates if an alarm level is exceeded and the audio-visual alarm warns at a high concentration of CO2. The installation is very easy because the enclosure can be mounted in two parts, making it ideal for installers.

The Kimo LCC-S configuration software makes it very easy to program and configure Kimo class 110, 210 en 310 transmitters.

The new C310 series are multifonctional transmitters which can be extended by an internal pressure module and two external probes. The display can show up to 4 parameters, but can also display a trend graph and the min/max values of each channel. The C310 has two analog outputs, which can be extended by two more. Modbus and Ethernet communication are available as an option.

The C310 transmitters are extendable by SPI2 internal pressure modules. It is also possible to extend the C310 with relay output module C4R, which has four 3A relays. If the two standard analog outputs are not sufficient, they can be extended by two more with the O2S module.

The multifunctional C310 transmitters can be extended by two extranal probes. There are probes available for temperature, humidity, CO, CO2 and air velocity.

The Kimo CPE310 differential pressure transmitter is the successor of the CPE300. The transmitter can be flush mounted in a wall and can be calibrated using special connectors from the front. The CPE310 has an internal buzzer with acceptance and delay. Optionally, an external sensor for temperature and humidity, can be connected, the display then scrolls between the values​​. The CPE310-S has 3...

The Kimo VT210 thermo-anemo hygrometer is a very comprehensive instrument for measuring air velocity and flow in air ducts, or the intake and discharge grids thereof. There is a choice of fixed and telescopic heat wire and impeller sensors in various diameters. Furthermore, the hand meter can be extended with additional sensors for temperature and humidity. The VT210 is available in various pac...

The Kimo MP210 micromanometer is a very extensive instrument for measuring pressure difference and air velocity with pitot tube in air ducts, over filters and in clean rooms. There is a choice of different pressure modules with different measuring ranges. Furthermore, the hand meter can be extended with extra sensors for temperature and air speed. The MP210 is available in various packages incl...

The multifunctional Kimo HQ210 indoor climate meter can measure all parameters that are important for a pleasant indoor climate. For example, the HQ210 can measure temperature, relative humidity, carbon dioxide (CO2), carbon monoxide (CO) and omni-directional flow (draft). The HQ210 series is available in composite packages with a selection of sensors, or can be assembled according to your own...

The multifunctional Kimo TM210 portable thermometer measures temperatures and temperature differences and can be used to determine the U-value (heat coefficient). The TM210 series is available in composite packages with a selection of sensors, or can be assembled entirely according to your own wishes. The hand meter is supplied in a robust carrying case and the packages also with calibration of...

The multifunctional climate meter AMI310 is the all-rounder within Kimo's hand-held meter package. All possible sensors, such as temperature, relative humidity, carbon dioxide (CO2), carbon monoxide (CO), air speed, pressure difference and more can be connected to this. The AMI310 series is available in composite packages with a selection of sensors, or can be assembled according to your own wi...

The Kimo KCC320 is a data logger for measuring temperature, air humidity, barometric pressure and CO2 for indoor climate. The air quality data logger can register 4 parameters simultaneously and has a memory of 2 million measuring points. The KCC320 can be read out with the free Kilog Lite PC software, but also communicates via Bluetooth with an Android, or Apple IOS device. For advanced report...

The Kimo KP320 and KP321 are pressure differential data loggers for measuring underpressure, overpressure and filter monitoring in air handling systems. The differential pressure data logger has a range of 1000 or 10000 Pa and has a memory of 2 million measuring points. The KP320 can be read out with the free Kilog Lite PC software, but also communicates via Bluetooth with an Android, or Apple...

The Kimo KPA320 is a data logger for measuring temperature, air humidity and barometric pressure for indoor air quality. The air quality data logger can register 4 parameters simultaneously and has a memory of 2 million measuring points. The KPA320 can be read out with the free Kilog Lite PC software, but also communicates via Bluetooth with an Android, or Apple IOS device. For advanced reports...

The Kimo GP500 series is a differential pressure generator for calibrating differential pressure meters. Due to compact size and convenient carrying case, the GP500 calibrator is also easy to use in the field.

Kimo's GH500 series is a relative humidity calibrator with internal humidity generator. The GH500 is suitable for calibration of measuring equipment in a calibration laboratory or on the road.

The Debimo self-averaging flow sensors work on the same principle as a pitot tube. The advantage of this measurement principle is that non-laminar air flow can still be measured reliably. The Debimo sensors are made of aluminum and are available in a wide range of standard lengths. In addition, the sensors can also be customized.

The Kimo SF50 Series is a simple and reliable passive temperature sensor. The SF50 can be performed as PT100, PT1000 or NTC sensor. The sensors are tailor made so you can determine the sensor and cable length yourself.

The Kimo TB50 series is a temperature sensor with a robust housing. By default, the sensor has a PT100 output, but it can also be mounted by the CO-P in the head as a 4-20 mA transmitter. The optional thermowell allows assembly and disassembly without disturbing the process.

The THIR50 series from Kimo is a temperature sensor with a DIN43650 connection. The sensor has a PT100 output. The optional thermowell enables assembly and disassembly without disturbing the process.