Dwyer Instruments
Search results: 1-48 of 88
Dwyer pitot tubes series 160
| SKU | 2001591 |
Dwyer pitot tubes, series 160 are constructed from corrosion resistant stainless steel for a lifetime of service. No correction factors or calibration required. Various standard sizes are available for use in small and large ducts.
Dwyer calibration pump series A-396A
| SKU | 2001500 |
Serves as pressure source to calibrate gages and transmitters or to set pressure switches. Use with manometer or other pressure standard. Generate pressures from a fraction of an inch w.c. to 72 psig (5 bar). Includes barbed fitting, tee connector and three 36? lengths of vinyl tubing.
Dwyer side mounting float switch series L4
| SKU | 2002064 |
Rugged and reliable the Series L4 Flotect Level switch operates automatically to indicate tank level. Perfect for starting or stopping pumps, opening or closing valves, or actuate level alarm signals. Horizontal installation or optional top mount vertical installation. ATEX version available.
Dwyer float switch series L8
| SKU | 2016559 |
Model L8 Flotect Liquid Level Switch features a leak proof body and float constructed from tough, durable polyphenylene sulfide which has excellent chemical resistance. This compact and reliable control is designed to handle temperatures up to (100°C and pressures to 10 bar.
Dwyer temperature sensor for duct mounting series TE-D
| SKU | 2018388 |
The Dwyer TE-D series consists of highly priced temperature sensors for installation in air ducts. There are several outputs that allow the sensor to be read on any type of Building automation system.
Dwyer temperature sensor for wall mounting series TE-E
| SKU | 2024540 |
The Dwyer TE-E series consists of very competitively priced temperature sensors for mounting in walls on the wall. There are several outputs for each type of BMS possible
Dwyer Magnehelic mounting accessories
| SKU | 2001498 |
The Dwyer Magnehelic can be mounted in different ways. By default, the instrument is equipped with all the accessories needed to mount the Magnehelic into a round hole in a panel. In addition, there are various accessories for mounting on a round tube, in a (system) wall, or with various brackets in a wall cabinet.
Dwyer submersible level transmitter series MBLT
| SKU | 2023194 |
The MBLT miniature submersible level transmitter is only 0.63˝ in diameter making it ideal for level monitoring in well and borehole applications with 4 to 20 mA or 0 to 5 V output. Designed for years of trouble free service, the MBLT has a welded 316 SS body and 316 SS nose cap. Body top is also 316 SS and tapered to prevent damage or snares when pulling the unit out of the installation. Feature…
Middelende tempratuursensor voor kanaalmontage serie TE-A
| SKU | 2026012 |
De TE-A serie bestaat uit middelende temperatuursensoren voor grote kanalen en luchtbehandelingskasten. De buigbare aluminium sensoren zijn verkrijgbaar in lengtes van 150, 300 en 600 mm. Deze capillairen bestaan uit vier temperatuursensoren die intern worden gemiddeld. De CC1-montagebeugels zijn beschikbaar om de capillair op de wand van de buis of luchtbehandelingsunit te monteren zonder de sen…
Passieve temperatuursensor voor buitenmontage serie TE-OND
| SKU | 2026045 |
De TE-OND serie bestaat uit passieve temperatuursensoren voor het meten van temperaturen buiten. De temperatuursensoren zijn geschikt om buiten te monteren, maar niet in direct zonlicht. Voor montage in direct zonlicht raden we een uitvoering met weerhut aan. De TE-OND serie is verkijgbaar met PT100, PT1000, 3 kOhm, 10 kOhm en 20 kOhm uitgangen.
Passieve temperatuursensor voor buiten met weerhut serie TE-RND
| SKU | 2019102 |
De TE-RND serie bestaat uit passieve temperatuursensoren voor buiten. De weerhut maakt de TE-RND serie ook geschikt voor plaasing in direct zonlicht. De TE-RND serie is verkijgbaar met PT100, PT1000, 3 kOhm, 10 kOhm en 20 kOhm uitgangen.
Passieve temperatuursensor voor buitenmontage serie O-4
| SKU | 2025401 |
De O-4 serie bestaat uit passieve temperatuursensoren voor het meten van temperaturen in de buitenlucht. De O-4 serie is verkijgbaar met PT100, PT1000, 3 kOhm, 10 kOhm en 20 kOhm uitgangen.
Dwyer CO2 transmitters series CDT
| SKU | W-9000392 |
The Dwyer CDT series CO2 transmitters are equipped with an NDIR (infrared) sensor. The transmitters are available in a wall-mounted version and in a version for duct mounting. Optionally, the transmitters are also available with a temperature output and SPST relay contact. Unique for this CO2 measurement is that it can also be used for rooms that are used 24 hours a day. Other sensors use the per…
Dwyer broken bag detection particle transmitters series PMT2
| SKU | W-9000428 |
The Dwyer PMT2 series is a particle transmitter designed for broken bag detection (fiter leak detection). The special electrostatic induction technology detects particles that flow past the sensor and converts this into a 4 to 20 mA signal based on the concentration of these particles. The PMT2 offers 6 sensitivity ranges that allow the user to choose the range that best fits the application. The…
Dwyer Room status monitor series RSMC StabiliSense
| SKU | RSMC StabiliSense |
The Dwyer RSMC Room Status Monitor Series is designed for critical applications with low differential pressures that also require immediate local visibility. The 4.3” full color touchscreen can be configured to measure positive or negative pressure in, for example, cleanrooms, hospitals, isolation rooms and laboratories. The Dwyer RSME Room Status Monitor is a complete solution with a touchscreen…
Dwyer Series PBLT2 submersible level transmitter for liquids
| SKU | 2029314 |
The Dwyer Series PBLT2 is a robust level transmitter for measuring liquid levels in water, wastewater, and slurries. T…
Dwyer vane switch series AAFS
| SKU | 2021464 |
The Model AAFS air flow switch provides excellent sensitivity and reliability at a very reasonable price. Quality features include a rugged die cast body, stainless steel vane and SPDT snap switch. Unit is field adjustable from 400-1600 FPM. Mounting is fast and simple,with only two screws needed. Vane fits 6 inch or larger ducts.
Dwyer averaging flow sensor series PAFS-1000
| SKU | 2019461 |
The Series PAFS-1000 Lightweight Flow Sensor is ideal for sensing differential pressure in the inlet section of variable air volume terminal units and fan terminal units. Units can also be used to sense differential pressure at other locations in the main or branch duct systems.
Dwyer carbon monoxide CO transmitter series GSTA
| SKU | 2023238 |
The Dwyer GSTA series is a carbon monoxide (CO) transmitter for room or channel mounting. The GSTA series can be selected with and without display and has a 0-10 V or 4-20 mA output. Optionally there is an implementation with Modbus or BACnet communication.
Dwyer luchtvochtigheidtransmitter serie RHRS
| SKU | 2025866 |
Met de RHRS serie weerhut voor luchtvochtigheidssensoren voorkomt u directe invloed van regen en zonlicht op de meting. De RHRS is er in een uitvoering met 6 of 10 lamellen. De weerhut wordt geleverd exclusief luchtvochtigheidssensor. De RHRS is geschikt voor verschillende modellen sensoren. De handige montage beugel maakt de de weerhut geschikt voor wandmontage of montage op buizen van 3/4 tot 1…
Dwyer CO2 transmitter for industry, animal husbandry and greenhouses series CDWP
| SKU | CDWP |
The Dwyer CDWP series consists of inductive CO2 transmitters for, for example, livestock farming (chicken barns), technical areas, monitoring of CO2 cooling systems and greenhouses. The CDWP measures the carbon dioxide content with an infrared (NDIR) measuring cell with a long lifespan. This sensor technology offers the highest accuracy compared to automatic baseline correction (ABC logic), which…
Dwyer Magnesense differential pressure transmitter series MSX Pro
| SKU | MSX Pro |
The Dwyer Magnesense Series MSX Pro differential pressure transmitter is the professional differential pressure transmitter that meets rigorous industry standards with innovative product design. The instrument has exceptional stability for use in critical building applications with the versatility of our original series Magnesense transmitters. Pressure ranges in Pa, mmH2O, and inWC are available…
Dwyer Critical room pressure monitor series RPMC
| SKU | RPMC |
The Dwyer pressure monitor series RPMC is designed for critical applications with low differential pressures. The transmitter uses a capacitive pressure sensor to achieve extremely high accuracy. There is a choice between ± 0.25% or ± 0.5% RSS. The RPMC has the same dimensions as the Magnehelic which simplifies an upgrade in the field. The pressure monitor is suitable for applications requiring s…
Dwyer Room status monitor series RSME
| SKU | RSME |
The Dwyer pressure monitor series RPMC is designed for critical applications with low differential pressures which must also be directly visible locally. The 4.3” full color touchscreen can be configured to measure positive or negative pressure in, for example, cleanrooms, hospitals, isolation rooms and laboratories. The Dwyer RSME Room Status Monitor is a complete solution featuring a touchscree…
Dwyer Room pressure monitor series RPME
| SKU | RPME FlexiSense |
The Dwyer pressure monitor series RPME is designed for critical applications with low differential pressures. The transmitter uses a piezo pressure sensor to achieve high accuracy. There is a choice between ±0.5% or ±1% RSS. The RPME has the same dimensions as the Magnehelic which simplifies an upgrade in the field. The pressure monitor is suitable for applications requiring strict pressure monit…
Dwyer flow meter series VF Visi-Float
| SKU | VF |
The Dwyer Flow Meter Series VF Visi-Float is a compact and reliable solution, ideal for measuring air, water, and other compatible liquids or gases. Made from high-quality acrylic and featuring a robust construction, the Visi-Float offers excellent durability and accuracy, even in demanding applications.
Dwyer RHPX Series Humidity and Temperature Transmitters
| SKU | 8007444 |
The Dwyer RHPX series offers a reliable solution for simultaneously measuring relative humidity and temperature in HVAC and building management systems. By combining two essential parameters in one compact transmitter, this device helps improve energy efficiency while optimizing occupant comfort.
Dwyer aan-uit of PID temperatuurregelaar serie 4C
| SKU | 4C |
De Serie 4C 1/4 DIN Temperatuurregelaar: Eenvoudige installatie, nauwkeurige PID-regeling, diverse uitgangen en configureerbare alarmen. Ideaal voor ovens, koelers en meer.
Dwyer ATEX/IECEx Differential Pressure Controller Series AT-DHC
| SKU | ATDHC |
The Dwyer Series AT-DHC is the successor to the well-known AT2DH3 differential pressure controller. This new generatio…
Dwyer U-tube liquid column manometer series Flex-Tube
| SKU | 2001547 |
These inexpensive manometers measure positive, negative and differential pressures. Dwyer Flex-Tube U-Tube Manometers combine the inherent accuracy of the simple "U" Tube with the durability of tough, long-lasting plastic construction. Series 1221 Manometer, the simplest, lowest cost basic U-gage. Series 1222 Manometer, alll the features of the 1221 plus magnetic clips. Series 1223 Manometer, the…
Dwyer differential pressure switch series 1910
| SKU | 2001571 |
The most popular differential pressure switch combines advanced design and precision construction to make these switches able to perform many of the tasks of larger, costlier units. Designed for air conditioning service, they also serve many fluidics, refrigeration, oven and dryer applications. For air and non combustible compatible gases, Series 1910 switches have set points from 18 to 400 Pa an…
Dwyer differential pressure switch series 1950
| SKU | 2001577 |
Model 1950 explosion proof pressure pressure switch combines the best features of the popular1900 series with an integral explosion-proof and weatherproof housing, making it an exceptional value for either application. It is CE, UL and CSA listed, FM approved for use in Class I, Div 1, Groups C and D, Class II Groups E, F, and G and Class III hazardous atmospheres (NEMA 7 & 9), Raintight NEMA 3 (…
Dwyer ATEX differential pressure switch series 1950G
| SKU | 2010783 |
The Model 1950G Explosion-Proof Switch combines the best features of the popular Dwyer® Series 1950 Pressure Switch with the benefit of natural gas compatibility. Units are rain-tight for outdoor installations, And are ATEX approved CE ATEX II 2G Exd IIB+H2 T6. Adjustment to the set point of the switch can be made without disassembly of the housing.
Dwyer Magnehelic differential pressure gauge series 2000
| SKU | 2001509 |
Dwyer Magnehelic gage for high accuracy, guaranteed within 2% of full scale and for the wide choice of 81 models available to suit your needs precisely. Using Dwyer's simple, frictionless Magnehelic gage movement, it quickly indicates low air or noncorrosive gas pressures, either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer flui…
Dwyer Minihelic differential pressure gage series 2-5000
| SKU | 2001533 |
The Minihelic is a small differential pressure manometer, suitable for many of the same applications as the Magnehelic gage where the greater accuracy, sensitivity, and higher and lower differential pressure ranges of the Magnehelic gage are not required. It can safely operate at total pressures up to 200 kPa. With the housing molded from mineral and glass filled nylon and the lens molded from ac…
Dwyer Photohelic differential pressure switch and gage series 3000MR
| SKU | 2016428 |
The series 3000MR Photohelic switch/gages combine the functions of a precise, highly repeatable differential pressure switch with a large easy-to-read analog pressure gage employing the durable, time-proven Magnehelic gage design. The Photohelic has 2 switch functions. Switch setting is easy to adjust with large external knobs on the gage face. Gage reading is unaffected by switch operation — wil…
Dwyer Capsuhelic differential pressure gage series 4000
| SKU | 2002149 |
The Capsuhelic gage is designed to give fast, accurate indication of differential pressures. The gage may be used as a readout device when measuring flowing fluids, pressure drop across filters, liquid levels in storage tanks and many other applications involving pressure, vacuum or differential pressure.
Dwyer thermo-hygrometer series 485B
| SKU | 2019734 |
Model 485B is a compact, hand-held instrument for measuring percentage of relative humidiy and temperature in °C or °F and also calculates dew point and wet bulb temperature. It will store up to 99 readings, ideal for technicians meeding to take multiple readings for later analyses.
Dwyer differential pressure transmitter series 605
| SKU | 2001478 |
The Series 605 Magnehelic Indicating Transmitter provides for both visual monitoring and electronic control of very low differential pressure. The Series 605 is ideal for control applications in building HVAC systems The easily read dial gage is complimented by the two-wire, 4-20 mA control signal utilizing the timeproven Dwyer® Magnehelic® gage mechanical design and Series 600 transmitter techno…
Dwyer differential pressure transmitter series 629C
| SKU | 2025846 |
The Series 629C Differential Pressure Transmitter monitors differential pressure of air and compatible gases and liquids with 0.5% accuracy. The design employs dual pressure sensors converting pressure changes into a standard 4-20 mA output signal for two wire circuits. Small internal volume and minimum moving parts result in exceptional response and reliability.
Dwyer differential pressure switch series ADPS
| SKU | 2016729 |
The Series ADPS Adjustable Differential Pressure Switch is designed for pressure, vacuum, and differential pressures. The adjustment knob allows changes to the switching pressure to be made without a pressure gage. The ADPS is available with settings from 20 Pa up to 5000 Pa. The compact size, adjustment knob and low cost make the ADPS the perfect choice for HVAC applications.
Dwyer digital pressure gage series DPG
| SKU | 2019205 |
The Series DPG has a high ±0.25% full scale accuracy. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commonly produced with analog gages. Series DPG is battery powered and has an auto-shut off to conserve battery life. Battery life, on average, will last 2000 hours. A 4 button key pad allows easy access to features without the need to wo…
Dwyer digital pressure gage and transmitter series DPG-200
| SKU | 2015878 |
The Series DPG-200 digital pressure gage has a precise ±0.25% full scale accuracy. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commonly produced with analog gages. The DPG-200 is packaged in a durable extruded aluminum case (IP66). The unit is powered by 12-24 VDC/VAC and contains two alarm set points along with a 4-20 mA process outp…
Dwyer digital pressure gage series DPGA
| SKU | 2016441 |
The series DPGA is the only economic digital pressure gage with selectable engineering units on the market. With its 1% accuracy and digital push-button zero, the DPGA is the perfect choice for digitally monitoring the pressures of air and compatible gases.
Dwyer digital pressure gage series DPGW
| SKU | 2016675 |
The Series DPGW is the only economic digital pressure gage for liquids with the ability to select engineering units on the market. With its 1% accuracy and digital push-button zero, the DPGW is the perfect choice for digitally monitoring the pressures of compatible liquids and gases. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commonl…
Dwyer ATEX differential pressure switch series H3
| SKU | 2018792 |
Explosion-proof, heavy duty, industrial pressure switch which provides sensitivity to differential pressure as low as 25 mbar up to 14 bar with a max. static pressure of 100 bar. This unit has a standard aluminium pressure chamber but is also available in 316 stainless steel. Approvals : UL, CSA, CE and ATEX.
Dwyer inclined vertical manometer series Mark II
| SKU | 2001556 |
Dwyer Mark II series molded manometers are of the inclined and inclined-vertical types. The curved inclined-vertical tube of the Mark II manometers can be mounted on any vertical surface with the two mounting screws provided. Ranges available from 0-80 mmH2O and from -10 to + 700 Pa.