Produal

The VVA and VVN series leak detection sensors are compatible with the LPH10 and VVK2 series leak detection switches. Various versions are available for floor mounting or installation under a water pipe. By mounting the sensor beneath a cooling pipe, condensation can also be detected.

The Produal RTX series is designed for environments where measurement accuracy and control stability are critical. With a basic accuracy of ±0.3 °C and extensive configuration options, this transmitter is ideally suited for projects that must comply with stringent standards such as LEED, BREEAM, and WELL (v2).

The RTX-D is technically identical to the standard RTX series, but provides additional visual feedback through the integrated display. This makes the transmitter particularly suitable for spaces where local control or direct reading of the temperature is desired, without making concessions to the technical specifications required for building certifications such as BREEAM or WELL.

The KEK1 is a simple passive condensation sensor. The sensor has a resistive output that provides a signal of approximately 10kOhm when condensation forms. It can be connected to the R102 and RS102 room controllers. The KEK1 sensor then ensures that the control of a chilled ceiling is interrupted when condensation forms on the cooling system.

The Produal PEL1000 series consists of straightforward differential pressure transmitters for filter monitoring and measuring static pressures in air ducts. In the field, the measuring range can be set to 500 or 1000 Pa. Optional versions are available with a display and/or Modbus communication.

The Produal PEL2500 series consists of straightforward differential pressure transmitters for filter monitoring and measuring static pressures in air ducts. In the field, the measuring range can be set to 100, 200, 500, 1000, 1500, 2000, or 2500 Pa. Optional versions are available with a display and/or Modbus communication.

The Produal PEL8K series consists of straightforward differential pressure transmitters for measuring static pressure and fan pressure in air ducts. In the field, the measuring range can be set from 1000 to 8000 Pa. Optional versions are available with a display and/or Modbus communication.

The PEL series differential pressure transmitters offer high reliability. They are suitable for building automation applications where extra accuracy and stability are required. Using jumpers, the measuring range can easily be adjusted in the field. In addition to filter monitoring and belt break detection, the PEL series is also highly suitable for measuring very low differential pressures, s…

The KPEL series combines two differential pressure measurements in a single transmitter. These dual differential pressure transmitters can be used to monitor two filters with one device. The measuring range can be selected in the field from 100 Pa to 2500 Pa. Optional versions are available with a display and/or Modbus communication.

The VPEL series differential pressure transmitters are developed for measuring water (glycol) pressure differences in cooling systems and central heating installations. The VPEL series is optionally available with a display.

The VPL series pressure transmitters are developed for measuring water pressure in cooling systems and central heating installations. The VPL series is optionally available with a display.

The HML series carbon monoxide transmitters are designed for detecting carbon monoxide in underground parking garages. The sensing element is an environmentally friendly electrochemical cell with a long service life, excellent long-term stability, and high accuracy. Since the sensor is heated, the transmitter also operates reliably at very low temperatures down to -30°C. The HML series feature…