Differential pressure transmitters

1-24 of 35
Dwyer Instruments

Dwyer differential pressure transmitter series 605

SKU 2001478
The Series 605 Magnehelic Indicating Transmitter provides for both visual monitoring and electronic control of very low differential pressure. The Series 605 is ideal for control applications in building HVAC systems The easily read dial gage is complimented by the two-wire, 4-20 mA control signal utilizing the timeproven Dwyer® Magnehelic® gage mechanical design and Series 600 transmitter tech...
* Prices excl. VAT, plus shipping
Dwyer Instruments

Dwyer differential pressure transmitter series 629C

SKU 2025846
The Series 629C Differential Pressure Transmitter monitors differential pressure of air and compatible gases and liquids with 0.5% accuracy. The design employs dual pressure sensors converting pressure changes into a standard 4-20 mA output signal for two wire circuits. Small internal volume and minimum moving parts result in exceptional response and reliability.
* Prices excl. VAT, plus shipping
Dwyer Instruments

Dwyer differential pressure transmitter series DM-2000

SKU W-9000117
The Dwyer series DM-2000 differential pressure transmitter senses the pressure of air and compatible gases and sends a standard 4-20 mA output signal. The DM-2000 housing is specifically designed to mount in the same diameter cutout as a standard Magnehelic gage. A wide range of models are available factory calibrated to specific ranges. Pressure connections are inherent to the glass filled pla...
* Prices excl. VAT, plus shipping
Micatrone

Micatrone differential pressure transmitter series MF-PD

SKU 2009079
Micaflex MF-P / MF-PD is a pressure transmitter designed for low positive, negative and differential pressure in air-handling and ventilation systems where low pressure measuring is needed. They have an adjustable damping and a choice between a 0-10 V or 4-20 mA output. All transmitters can be delivered with or without a LCD display.
* Prices excl. VAT, plus shipping
Micatrone

Micatrone pressure-flow transmitter series MF-PFA

SKU 2011700
The MF-PFA series can measure the airflow in combination with the self-averaging MFS flow sensors in addition to differential pressure. Besides analog outputs, this series also features a built-in PI controller, which can directly controll a fan and 2 swithes for local alarms. Due to the high accuracy and stability, the MF-PFA is ideal for use in laboratories, hospitals and clean rooms. Each in...
* Prices excl. VAT, plus shipping
Micatrone

Micatrone pressure-flow transmitter series MF-PFT

SKU 2009337
The MF-PFT series can measure the airflow in combination with the self-averaging MFS flow sensors in addition to differential pressure. Besides analog outputs, this series also features a built-in PI controller, which can directly controll a fan. Due to the high accuracy and stability, the MF-PFT is ideal for use in laboratories, hospitals and clean rooms. Each instrument is fully programmable.
* Prices excl. VAT, plus shipping
Dwyer Instruments

Dwyer MagneSense differential pressure transmitter series MS

SKU W-9000193
The Series MS Magnesense Differential Pressure Transmitter is an extremely versatile transmitter for monitoring pressure and air velocity. This compact package is loaded with features such as: field selectable english or metric ranges, field upgradeable LCD display, adjustable dampening of output signal (with optional display) and ability to select a square root output for use with pitot tubes...
* Prices excl. VAT, plus shipping
Kimo Sauermann

Kimo differential pressure transmitter series CP111-112-113

SKU 2020663
The Kimo CP110 series is a differential pressure transmitter with or without display. The CP111, CP112 and CP113 are ideal for filter monitoring applications with an analog output to a building management system. The installation is very easy and the housing can be mounted in two parts making it ideal for installers.
* Prices excl. VAT, plus shipping
Kimo Sauermann

Kimo differential pressure transmitter serie CP114-115

SKU 2020671
The Kimo CP110 series is a differential pressure transmitter with or without display. The CP114 and CP115 are ideal for filter monitoring applications with an analog output to a building management system. The installation is very easy and the housing can be mounted in two parts making it ideal for installers.
* Prices excl. VAT, plus shipping
Kimo Sauermann

Kimo differential pressure transmitter series CP210

SKU 2020688
The Kimo CP210 is a differential pressure transmitter that can also be used as a flow transmitter in combination with the Debimo averaging pitot tubes or Micatrone MFS series flow sensors. The CP211 and CP212 have an automatic zero setting. The CP210 has a PT100 input for an additional temperature measurement.
* Prices excl. VAT, plus shipping
Kimo Sauermann

Kimo multifunctional transmitter series C310

SKU 2021719
The new C310 series are multifonctional transmitters which can be extended by an internal pressure module and two external probes. The display can show up to 4 parameters, but can also display a trend graph and the min/max values of each channel. The C310 has two analog outputs, which can be extended by two more. Modbus and Ethernet communication are available as an option.
* Prices excl. VAT, plus shipping
Kimo Sauermann

Kimo differential pressure transmitter serie CPE310-S

SKU 2021684
The Kimo CPE310 differential pressure transmitter is the successor of the CPE300. The transmitter can be flush mounted in a wall and can be calibrated using special connectors from the front. The CPE310 has an internal buzzer with acceptance and delay. Optionally, an external sensor for temperature and humidity, can be connected, the display then scrolls between the values​​. The CPE310-S has 3...
* Prices excl. VAT, plus shipping
Hitma

Hitma touchscreen room pressure monitor series ATM420

SKU 2029297
The ATM420 is a touchscreen display that is designed as audiovisual room pressure monitoring in clean rooms, operating rooms or isolation rooms. The display provides visual monitoring that functions as a traffic light. If the pressure difference is correct, the entire display will turn green and outside the desired values the display will turn red. In addition, the display has a built-in acoust...
* Prices excl. VAT, plus shipping
Dwyer Instruments

Dwyer differential pressure transmitter with flow calculation and alarms series DH3

SKU 2017467
The Dwyer DH3 series Digihelic differential pressure gauge is a 3-in-1 instrument with a digital display, relay contacts and a transmitter output, all packed in the popular Photohelic housing. By combining these 3 functions, you can reduce different instruments to one product, saving you inventory, installation time and money. The DH3 controller is the ideal instrument for pressure (difference)...
* Prices excl. VAT, plus shipping
Micatrone

Micatrone Pressure- and Flow controller series MF-PFC

SKU W-9000511
In addition to differential pressure, the MF-PFC transmitter also measures air velocities in combination with the MFS self-averaging flow sensors. The transmitter has 2 analog outputs that can be used for differential pressure, flow or PI control output. For example, the control output can be used to directly control a VAV valve. High accuracy and stability make the MF-PFC ideal for use in labo...
* Prices excl. VAT, plus shipping
Dwyer Instruments

Dwyer ATEX differential pressure transmitter series AT2MS

SKU W-9000396
The ATEX-certified AT2MS series Magnesense® differential pressure transmitter is an extremely versatile transmitter for monitoring pressure and air velocity in potentially hazardous areas. The AT2MS transmitter can be set up in English or metric ranges and can be extended with an LCD screen. A square root output can be set for use with pitot tubes and similar flow sensors. The flameproof ATEX h...
* Prices excl. VAT, plus shipping
Dwyer Instruments

Dwyer ATEX differential pressure controller series AT2DH3

SKU W-9000397
The ATEX certified AT2DH3 series Digihelic® differential pressure controller is a 3-in-1 instrument that consists of a digital differential pressure gauge, relay contacts for alarms, or on-off control and a transmitter output. The AT2DH3 can also be used to measure air velocities and flow in combination with a pitot tube. The AT2DH3 has an analogue 4-20 mA output and two SPDT relay contacts wit...
* Prices excl. VAT, plus shipping
Foxboro by Schneider Electric

Foxboro differential pressure transmitter series IDP10

SKU W-9000427
The Foxboro IDP10 series is a compact and robust differential pressure transmitter for direct process mounting. The IDP10 series is available in different measuring ranges of 75 mbar, 500 mbar, 2.1 bar, 21 bar and 210 bar differential pressure. As signal output you can choose 1-5V, 4-20 mA, Hart, Foudation Fielbus and FoxCom. The IDP10 series can be designed as a differential pressure transmitt...
* Prices excl. VAT, plus shipping
Foxboro by Schneider Electric

Foxboro pneumatic differential pressure transmitters series 13A, 13HA and 15A

SKU W-9000453
The Foxboro® brand Models 15A, 13A, and 13HA pneumatic d/p Cell transmitters measure differential pressure and transmit a standard pneumatic signal to receivers which may be several hundred metres or yards away. Foxboro d/p Cell Transmitters have been the standard of process industry ever since they were developed and introduced for sale more than 30 years ago. Many thousands of successful, tro...
* Prices excl. VAT, plus shipping
Foxboro by Schneider Electric

Foxboro differential pressure transmitter series IDP05S

SKU W-9000461
The IDP05S series is a budget-friendly differential pressure transmitter within the Schneider Electric range with standard SIL2 certification. The IDP05S measures a pressure difference with an accuracy of 0.075% of the chosen measuring range, ranging from 50 kPa to 207 bar. This makes the IDP05S differential pressure transmitter less accurate than its bigger brothers, but also a lot cheaper. Fo...
* Prices excl. VAT, plus shipping
Foxboro by Schneider Electric

Foxboro differential pressure transmitter series IDP10S

SKU W-9000464
The IDP10S series is a very robust and advanced differential pressure transmitter within the Schneider Electric range and is SIL2 certified as standard. The IDP10S measures a pressure difference with an accuracy of 0.05% of the reading. Thanks to the special FoxCal technology, one transmitter has no less than 11 calibration curves in a pressure range of 0-414 bar. This allows the same model of...
* Prices excl. VAT, plus shipping

chat uitgeschakeld voor Engels