Thermostats and temperature sensors for air handling HVAC

The Dwyer TE-D series consists of highly priced temperature sensors for installation in air ducts. There are several outputs that allow the sensor to be read on any type of Building automation system.

TEK temperature sensors are designed for automatic ventilating systems to detect duct temperature. Sensors are mounted to the duct by means of an adjustable duct connection flange for optimal temperature detection

The Dwyer TE-E series consists of very competitively priced temperature sensors for mounting in walls on the wall. There are several outputs for each type of BMS possible

The TST series temperature switches can be used as temperature sensors for controlling temperatures in rooms or ducts. The status LED indicates if an alarm level is exceeded and the display shows the current temperature. The installation is very easy and the housing can be mounted in two parts making it ideal for installers.

The Kimo TM110 series is a transmitter with or without display. The TM110 is ideal for use as a temperature measurement in rooms and air ducts for connection to a building management system. The installation is very easy and the housing can be mounted in two parts making it ideal for installers.

The Kimo TM210 series is a transmitter with or without display. The TM210 is ideal for use as a temperature measurement in rooms and air ducts for connection to a building management system. This temperature transmitter has an internal sensor and a PT100 input, or two PT100 inputs for measuring temperature differences.

The Kimo SF50 Series is a simple and reliable passive temperature sensor. The SF50 can be performed as PT100, PT1000 or NTC sensor. The sensors are tailor made so you can determine the sensor and cable length yourself.

The Kimo TB50 series is a temperature sensor with a robust housing. By default, the sensor has a PT100 output, but it can also be mounted by the CO-P in the head as a 4-20 mA transmitter. The optional thermowell allows assembly and disassembly without disturbing the process.

The BTT series temperature transmitters are ideal for measuring temperature in air ducts. Sensor lengths of up to 450 mm insertion are possible for duct mounting sensors. The plastic terminal box with fastening tabs makes the installation easier.

The Dwyer DFS series serves as frost protection for air treatment cabinets. The DFS series thermostat is available in manual or automatic reset. You can choose from a cappilar length of 3 or 6 meters.

The Dwyer BTT-E series is a simple space temperature transmitter for wall mounting. For the analogue output, you can choose between 4-20 mA and 0-10 V, so that the transmitters can be connected to any BMS.

The Dwyer BTT-R series is a temperature transmitter for outdoor mounting with radiation shield. The weather shelter ensures that the temperature measurement is not affected by direct sunlight. The BTT-R temperature transmitter has an analogue output for coupling to each building management system.

• Measuring unit, Ethernet-based (PoE), Te/RH, display
• Temperature range: -30°C to +60°C (± 0.4°C)
• RH range: 0 to 100% RH (± 2.5% RH)
• Probe length: 75mm
• Protocols: HTTP(s), Web server (www), HTTP GET (JSON, XML), ModbusTCP, SNMPv1, SNMPv2c, SNMPv3
• Alarm protocol: e-mail (SMTP), syslog
• Power supply: Power over Ethernet (IEEE 802.3af) or 5–24 V…

• Measuring unit, Ethernet-based (PoE), 1x connection (Te/RH or CO2 sensor), display
• Model: ATE-1U
• 1x connection (4-pin Hirschmann): for Te/RH or CO2 sensor
• Protocols: HTTP(s), Web server (www), HTTP GET (JSON, XML), ModbusTCP, SNMPv1, SNMPv2c, SNMPv3
• Alarm protocol: e-mail (SMTP), syslog
• Power supply: Power over Ethernet (IEEE 802.3af) or 5–24 V DC