Humidity sensors and hygrostats for air handling HVAC

The Kimo TH210 series is a relative humidity transmitter with or without display. The TH210 is ideal to use as temperature and humidity measurement in air ducts and rooms for connection to a building management system. The transmitter calculates the absolute humidity, dew point, wet and dry bulb temperature. For temperatures up to 180°C stainless steel sensors are available. There are also severa…

The Kimo TH110 series is a relative humidity transmitter with or without display. The TH110 is ideal to use as humidity and temperature measurement in rooms and air ducts for connection to a building management system. The installation is very easy and the housing can be mounted in two parts making it ideal for installers.

The Kimo HM110 series is a transmitter with or without display. The HM110 is ideal to use as humidity measurement in air ducts and rooms for connection to a building management system. The installation is very easy and the housing can be mounted in two parts making it ideal for installers.

The Kimo HST series humidity switches can be used as a humidistat in rooms or ducts. The status LED indicates if an alarm level is exceeded and the display shows the current relative humidity. The installation is very easy and the housing can be mounted in two parts making it ideal for installers.

The Dwyer RHP-E series is a combined room temperature and humidity sensor for wall mounting. There can be chosen from different accuracies and a housing with or without display. There are several outputs that allow the sensor to be read on any type of GBS.

The Dwyer WHT series humidity transmitters measure temperature and relative humidity in the outside. The waterproof housing and sintered filter protect the sensor from weather effects. The WHT series is available with an analogue output for relative humidity and optionally also temperature.

The Dwyer RHP-D series has a combined temperature and humidity sensor for installation in air ducts. There can be selected from different precision and a performance with or without display. There are several outputs that allow the sensor to be read on any type of BMS.

• Measuring unit, Ethernet-based (PoE), Te/RH/Atm. Pressure, display
• Temperature range: -30°C to +60°C (± 0.4°C)
• RH range: 0 to 100% RH (± 2.5% RH)
• Atm. Pressure range: 600 to 110 hPa (±1.3 hPa *)
• Probe length: 75 mm
• Protocols: HTTP(s), Web server (www), HTTP GET (JSON, XML), ModbusTCP, SNMPv1, SNMPv2c, SNMPv3
• Alarm protoc…

• Ethernet-Based Monitoring Unit (PoE) with Integrated Temperature, Relative Humidity, CO₂ and Atmospheric Pressure Sensors, and Display
• Temperature measuring range: -30°C to +60°C (±0.4°C)
• Relative humidity measuring range: 0 to 100% RH (±2.5% RH)
• CO₂ measuring range: 0 to 5000 ppm, accuracy ±(50 ppm + 3% of reading)
• Atmospheric pressure measuring range: 600…

• Measuring unit, Ethernet-based (PoE), Te/RH, display
• Temperature range: -30°C to +60°C (± 0.4°C)
• RH range: 0 to 100% RH (± 2.5% RH)
• Probe length: 75mm
• Protocols: HTTP(s), Web server (www), HTTP GET (JSON, XML), ModbusTCP, SNMPv1, SNMPv2c, SNMPv3
• Alarm protocol: e-mail (SMTP), syslog
• Power supply: Power over Ethernet (IEEE 802.3af) or 5–24 V…

• Measuring unit, Ethernet-based (PoE), 1x connection (for Pt1000 sensor), display
• Model: ATE-TE
• 1x connection (RCA): for Pt1000 sensor
• Protocols: HTTP(s), Web server (www), HTTP GET (JSON, XML), ModbusTCP, SNMPv1, SNMPv2c, SNMPv3
• Alarm protocol: e-mail (SMTP), syslog
• Power supply: Power over Ethernet (IEEE 802.3af) or 5–24 V DC
…

• Measurement unit, Ethernet-based (PoE), with integrated CO₂ and atmospheric pressure sensor, display
• CO₂ measuring range: 0 to 5000 ppm, accuracy ±(50 ppm + 3% of reading)
• Atmospheric pressure measuring range: 600 to 1100 hPa (±1.3 hPa*)
• Supported protocols: HTTP(S), web server (WWW), HTTP GET (JSON, XML), Modbus TCP, SNMPv1, SNMPv2c, SNMPv3
• Alarm protocols…

• Ethernet-Based Monitoring Unit (PoE) with Two Universal Sensor Inputs and Display
• Two inputs (4-pin Hirschmann connectors) for connecting external temperature/relative humidity or CO₂ sensors
• Supported protocols: HTTP(S), web server (WWW), HTTP GET (JSON, XML), Modbus TCP, SNMPv1, SNMPv2c, SNMPv3
• Alarm protocols: E-mail (SMTP), Syslog
• Power supply: Power ov…

• Ethernet-Based Monitoring Unit (PoE) with Dual Pt1000 Temperature Probe Inputs and Display
• Two Cinch inputs for connection of external Pt1000 temperature probes
• Supported protocols: HTTP(S), web server (WWW), HTTP GET (JSON, XML), Modbus TCP, SNMPv1, SNMPv2c, SNMPv3
• Alarm protocols: E-mail (SMTP), Syslog
• Power supply: Power over Ethernet (IEEE 802.3af) or 5…

• Measuring unit, Ethernet-based (PoE), Atm. Pressure and 1x external connection (Te/RH or CO2), display
• Internal atmospheric pressure sensor
• 1x connection: 4-pin Hirschmann connector for Te/RH or CO2 sensor
• Protocols: HTTP(s), Web server (www), HTTP GET (JSON, XML), ModbusTCP, SNMPv1, SNMPv2c, SNMPv3
• Alarm protocol: e-mail (SMTP), syslog
…

• Ethernet-Based Monitoring Unit (PoE) with One Universal Sensor Input, Two Pt1000 Inputs, and Display
• One 4-pin Hirschmann connector for connection of an external temperature/relative humidity or CO₂ sensor
• Two Cinch inputs for connection of external Pt1000 temperature probes
• Supported protocols: HTTP(S), web server (WWW), HTTP GET (JSON, XML), Modbus TCP, SNMPv1, S…

• Measuring unit, Ethernet-based (PoE), 1x connection (Te/RH or CO2 sensor), display
• Model: ATE-1U
• 1x connection (4-pin Hirschmann): for Te/RH or CO2 sensor
• Protocols: HTTP(s), Web server (www), HTTP GET (JSON, XML), ModbusTCP, SNMPv1, SNMPv2c, SNMPv3
• Alarm protocol: e-mail (SMTP), syslog
• Power supply: Power over Ethernet (IEEE 802.3af) or 5–24 V DC