Carbon dioxide CO2

1-8 of 8

Carbon dioxide (CO2) is not a dangerous gas because, after all, we breathe it out ourselves, but too much CO2 is not healthy, If the CO2 concentration in a room gets too high, you may experience headaches, dizziness, shortness of breath, increased heart rate, fatigue and difficulty concentrating. By measuring CO2 levels in a room, you can take action if they get too high.

Our carbon dioxide sensors can be interfaced with building management systems to control the ventilation system and supply fresh air. There are also simpler solutions that provide a local audiovisual alarm, after which you can manually open a window. Applications of CO2 meters include; schools, museums, office and government buildings.

Kimo carbon dioxide switch series CO2ST

SKU 2020820
Kimo CO2ST series is a carbon dioxide switch with indicator. The CO2ST is ideal to use as an alarm for CO2. The status LED indicates if an alarm level is exceeded and the audio-visual alarm warns at a high concentration of CO2. The installation is very easy because the enclosure can be mounted in two parts, making it ideal for installers.

Kimo multifunctional transmitter series C310

SKU 2021718
The new C310 series are multifonctional transmitters which can be extended by an internal pressure module and two external probes. The display can show up to 4 parameters, but can also display a trend graph and the min/max values of each channel. The C310 has two analog outputs, which can be extended by two more. Modbus and Ethernet communication are available as an option.

Dwyer Modbus and BACnet CO2, temperature and RV transmitter series CDTA

SKU W-9000391
The Dwyer CDTA series carbon dioxide meter combines three measurements in one compact housing. The CDTA measures CO2, humidity and temperature, but can also be used as a set point generator. Communication with a GBS or PLC is via Modbus®, or BACnet, which can be chosen in the field. To facilitate installation, the RS485 address can be set using dip switches. The CDTA uses a non-dispersive infra...

CO2-transmitter en PI-regelaar voor kanaalmontage serie HDK

SKU 2025896
De HDK serie is een koolmonoxide (CO2) transmitter met PI-regelaar voor kanaalmontage. De CO2-transmitter meet het CO2-gehalte en optioneel ook de temperatuur in een luchtkanaal. De meetwaardes kunnen met analoge signalen worden doorgestuurd naar het gebouwbeheersysteem om hiermee de ventilatie aan te sturen. De HDK heeft ook een ingebouwde PI-regelaar waardoor er ook direct een frequentieregel...

CO2-transmitter en PI-regelaar voor ruimtemontage serie HDH

SKU 2013157
De HDH serie is een koolstofdioxide (CO2) transmitter met PI-regelaar voor ruimtemontage. De CO2-transmitter meet het CO2-gehalte en optioneel ook de temperatuur in de ruimte. De meetwaardes kunnen met analoge signalen worden doorgestuurd naar het gebouwbeheersysteem om hiermee de ventilatie aan te sturen. De HDH heeft ook een ingebouwde PI-regelaar waardoor er ook direct een frequentieregelaar...

Dwyer CO2 transmitter for industry, animal husbandry and greenhouses series CDWP

SKU W-9000439
The Dwyer CDWP series consists of inductive CO2 transmitters for, for example, livestock farming (chicken barns), technical areas, monitoring of CO2 cooling systems and greenhouses. The CDWP measures the carbon dioxide content with an infrared (NDIR) measuring cell with a long lifespan. This sensor technology offers the highest accuracy compared to automatic baseline correction (ABC logic), whi...

MB450 serie CO2-meter voor een gezond binnenklimaat

SKU 8002672
  • De bestverkochte CO2-meter van Nederland en België.
  • Ideaal voor het bewaken van het binnenklimaat in onder andere scholen, kinderdagverblijven, kantoren en musea.
  • Automatische rapportages met alle benodigde inzichten
  • Voldoet aan de eisen van zowel de GGD als de Gezondheidsdienst.
  • Zelfkalibrerende CO2-sensor, dus onderhoudsvrij
  • Meet CO2,...

AT-CO2-FB02 wandmonitor voor CO2 en O2

SKU 8000484
  • Meet CO2 concentratie tot 50.000 ppm, O2 en temperatuur.
  • Voorzien van relaisuitgang waarmee aangesloten apparaten aangestuurd kunnen worden zoals een CO2 generator of ventilatieventilator. 
  • Ideaal voor brouwerijen, HVAC, metaal- en verlichtingsindustrie.