All instrumentation
1-24 of 318
Dwyer Instruments
Dwyer U-tube liquid column manometer series Flex-Tube
SKU | 2001550 |
These inexpensive manometers measure positive, negative and differential pressures. Dwyer Flex-Tube U-Tube Manometers combine the inherent accuracy of the simple "U" Tube with the durability of tough, long-lasting plastic construction. Series 1221 Manometer, the simplest, lowest cost basic U-gage. Series 1222 Manometer, alll the features of the 1221 plus magnetic clips. Series 1223 Manometer, t...
* Prices excl. VAT, plus shipping
Dwyer Instruments
Dwyer pitot tubes series 160
SKU | 2001591 |
Dwyer pitot tubes, series 160 are constructed from corrosion resistant stainless steel for a lifetime of service. No correction factors or calibration required. Various standard sizes are available for use in small and large ducts.
* Prices excl. VAT, plus shipping
Dwyer Instruments
Dwyer Minihelic differential pressure gage series 2-5000
SKU | 2001533 |
The Minihelic is a small differential pressure manometer, suitable for many of the same applications as the Magnehelic gage where the greater accuracy, sensitivity, and higher and lower differential pressure ranges of the Magnehelic gage are not required. It can safely operate at total pressures up to 200 kPa. With the housing molded from mineral and glass filled nylon and the lens molded from...
* Prices excl. VAT, plus shipping
Barksdale
Barksdale pressure switch series 8000
SKU | 2011464 |
Series 8000 is mechanical pressure switches in diaphragm or piston design. The successors of the product lines XTM, XTK, X1T and 96200 have the additional advantage.6 pressure ranges allow precise setting between 0,4 to 6 bar and from 80 to 600 bar. The housing is made of aluminium diecast 230 with a protection class IP¨65. The 8000-series are ideal for OEM, mobile- and industrial-hydraulics an...
* Prices excl. VAT, plus shipping
Barksdale
Barksdale hydraulic pressure switch series 9000
SKU | 2016659 |
The series 9000 switches with a piston-type spring-loaded pressure element and snap-acting microswitch are characterized by their compact design. The housing is made of aluminium and has a protection class IP65. 3 pressure ranges allow precise setting between 6 and 400 bar. The switch is ideal for OEM applications, hydraulic and pneumatic systems.
* Prices excl. VAT, plus shipping
Barksdale
Barksdale ATEX pressure switch series 9681X
SKU | 2011433 |
Piston pressure switch with explosion proof housing, for hazardous areas. Safe to adjust during operation. Measuring ranges available from 0,1 to 1 bar and from 3,4 to 34,5 bar. This switch is ideal for process Industry, petrochemical plants, machine tool industry, compressors.
* Prices excl. VAT, plus shipping
Barksdale
Barksdale pressure switch series 9692X
SKU | 2009361 |
Piston pressure switch with explosion proof housing, for hazardous areas. Safe to adjust during operation. Measuring ranges available from 17,2 to 571 bar. This switch is ideal for process Industry, petrochemical plants, machine tool industry, compressors.
* Prices excl. VAT, plus shipping
Dwyer Instruments
Dwyer digital pressure gage series DPG
SKU | 2013388 |
The Series DPG has a high ±0.25% full scale accuracy. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commonly produced with analog gages. Series DPG is battery powered and has an auto-shut off to conserve battery life. Battery life, on average, will last 2000 hours. A 4 button key pad allows easy access to features without the need to...
* Prices excl. VAT, plus shipping
Dwyer Instruments
Dwyer digital pressure gage series DPGA
SKU | 2016441 |
The series DPGA is the only economic digital pressure gage with selectable engineering units on the market. With its 1% accuracy and digital push-button zero, the DPGA is the perfect choice for digitally monitoring the pressures of air and compatible gases.
* Prices excl. VAT, plus shipping
Dwyer Instruments
Dwyer digital pressure gage series DPGW
SKU | 2016675 |
The Series DPGW is the only economic digital pressure gage for liquids with the ability to select engineering units on the market. With its 1% accuracy and digital push-button zero, the DPGW is the perfect choice for digitally monitoring the pressures of compatible liquids and gases. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commo...
* Prices excl. VAT, plus shipping
Kimo Sauermann
Kimo liquid column manometers series HP
SKU | 2009488 |
The HP range of inclined liquid column manometers, measure slight variations in pressure, depression or differential pressure of air or gas. The are particulary recommended for measuring overpressure in clean rooms, laboratories, aseptic rooms and laminar flows.
* Prices excl. VAT, plus shipping
Dwyer Instruments
Dwyer inclined vertical manometer series Mark II
SKU | 2001556 |
Dwyer Mark II series molded manometers are of the inclined and inclined-vertical types. The curved inclined-vertical tube of the Mark II manometers can be mounted on any vertical surface with the two mounting screws provided. Ranges available from 0-80 mmH2O and from -10 to + 700 Pa.
* Prices excl. VAT, plus shipping
Micatrone
Micatrone averaging flow sensor series MFS
SKU | 2012070 |
The MFS flowsensor is a patented, self-averaging flow-sensor for all kinds of ventilation ducts. The average of air flow is measured across the whole length of the sensor. Gives a 2,5 times higher differential pressure than a Prandtl tube measuring. Easy to install in existing ducts. Lengths from 100 to 2500 mm.
* Prices excl. VAT, plus shipping
Micatrone
Micatrone averaging flow sensor series MFS-SS
SKU | W-9000185 |
Micatrone's flow sensor MFS-SS has been developed to meet the great demand for accurate air flow measurement in all types of air-handling systems. The MFS-SS is based on the principle of averaging the velocity profile over the height or the diameter of the duct.
* Prices excl. VAT, plus shipping
Dwyer Instruments
Dwyer Mini-photohelic differential pressure switch series MP
SKU | 2013247 |
The MP Mini-Photohelic differential pressure switch/gage combines the time proven Minihelic II differential pressure gage with two SPDT switching setpoints. The Mini-Photohelic gage is designed to measure and control positive, negative, or differential pressures consisting of non-combustible and non-corrosive gases. Gage reading is independent of switch operation. This extremely compact switch...
* Prices excl. VAT, plus shipping
Dwyer Instruments
Dwyer variable area flowmeter series RM
SKU | 2009061 |
The Rate-Master® flowmeter line of direct reading precision flowmeters incorporates many unique user features at moderate cost. These low cost flowmeters are ideal for general use.
* Prices excl. VAT, plus shipping
Kimo Sauermann
Kimo pitot tubes series TPL
SKU | 2010786 |
KIMO offers a wide range of high-quality and accurate Pitot tubes, as per the AFNOR NFX 10-112 norm. These Pitot tubes, when being connected to a differential column / or needle / or electronical manometer, can measure the dynamic pressure of a moving fluid in a duct, and then can deduct its air velocity in m/s and its airflow in m3/h. These Pitot tubes are used in HVAC field, vacuum cleaning a...
* Prices excl. VAT, plus shipping
Dwyer Instruments
Dwyer vane operated serie V10
SKU | 2005601 |
V10 is esigned to provide an inexpensive, reliable unit to monitor the presence or absence of flow in a system. The V10 flow switch is used to monitor unattended equipment and protect it from costly damage. The V10 flow switch utilizes a rugged, hermetically sealed reed switch which is encapsulated in a polypropylene switch housing that fits into a standard heavy duty leak proof brass body or o...
* Prices excl. VAT, plus shipping
Dwyer Instruments
Dwyer Magnehelic mounting accessories
SKU | 2001498 |
The Dwyer Magnehelic can be mounted in different ways. By default, the instrument is equipped with all the accessories needed to mount the Magnehelic into a round hole in a panel. In addition, there are various accessories for mounting on a round tube, in a (system) wall, or with various brackets in a wall cabinet.
* Prices excl. VAT, plus shipping
Dwyer Instruments
Dwyer smart air hood balometer series SAH
SKU | W-9000383 |
The Dwyer SAH Smart Air Hood is a revolution in the field of balometers. The patented design ensures minimal resistance and the balometer is pre-calibrated for each type of grid. This makes the SAH the most reliable balometer on the market. The hood can easily be clamped between the floor and the ceiling with the included telescopic rod. The readout device communicates wirelessly with the hood...
* Prices excl. VAT, plus shipping
Dwyer Instruments
* Prices excl. VAT, plus shipping
Foxboro by Schneider Electric
Schneider Electric wireless central collector with WirelessHART for IAN series WCC10
SKU | W-9000472 |
With the WCC10 central collector from Schneider Electric, the data from 8 wireless IAN field sensors can be collected. There are field sensors for measuring temperature, pressure and differential pressure. Communication between the field sensors and the WCC10 is via Bluetooth and can be fully configured with an app via WiFi. This makes the system very flexible and very easy to install. In addit...
* Prices excl. VAT, plus shipping
Foxboro by Schneider Electric
Schneider Electric economische magnetische flowmeter serie 8400A
SKU | W-9000477 |
De Schneider electric 8400A serie magnetische flowbuis vormt samen met de IMT serie transmitters een economische flowmeter met wafer-aansluiting. De 8400A magnetische flowmeters zijn beschikbaar in maten van DN10 tot DN150 voor licht industriële toepassingen tegen een scherpe prijs. Voor een hogere nauwkeurigheid en chemische bestendigheid adviseren wij de 8500A serie.
* Prices excl. VAT, plus shipping
Foxboro by Schneider Electric
Schneider Electric robuuste magnetische flowmeter serie 8500A
SKU | W-9000478 |
De Schneider electric 8500A serie magnetische flowbuis vormt samen met de IMT serie transmitters een robuuste en betrouwbare flowmeter met wafer-aansluiting. De 8500A magnetische flowmeters zijn beschikbaar in maten van DN2,5 tot DN100 voor industriële toepassingen met hoge nauwkeurigheid. Voor de lining en electrodes van de 8500A kan worden gekozen uit verschillende materialen voor optimale ch...
* Prices excl. VAT, plus shipping