All instrumentation

A reliable and accurate portable instrument for measuring pressure and differential pressure and air velocity. (with pitot tube). Standard functions are: min, max, hold, self-calibration, adjustable automatic shut-off and backlight. Each instrument is supllied with a transport case, tubing, calibration certificate (model E) or adjusting certificat (model S)

The Dwyer RHP-E series is a combined room temperature and humidity sensor for wall mounting. There can be chosen from different accuracies and a housing with or without display. There are several outputs that allow the sensor to be read on any type of GBS.

The Rate-Master® flowmeter line of direct reading precision flowmeters incorporates many unique user features at moderate cost. These low cost flowmeters are ideal for general use.

Reliable and accurate handheld meter to measure air velocity and flow. The VT110 series has a hotwire sensor with a built-in temperature sensor. Standard functions: min, max, hold, auto power off and choice of units. Each instrument is supplied in a carrying case and calibration report or test certificate (S models).

The Dwyer WHT series humidity transmitters measure temperature and relative humidity in the outside. The waterproof housing and sintered filter protect the sensor from weather effects. The WHT series is available with an analogue output for relative humidity and optionally also temperature.

The Kimo CP110 series is a differential pressure transmitter with or without display. The CP111, CP112 and CP113 are ideal for filter monitoring applications with an analog output to a building management system. The installation is very easy and the housing can be mounted in two parts making it ideal for installers.

The Kimo CP110 series is a differential pressure transmitter with or without display. The CP114 and CP115 are ideal for filter monitoring applications with an analog output to a building management system. The installation is very easy and the housing can be mounted in two parts making it ideal for installers.

The new C310 series are multifonctional transmitters which can be extended by an internal pressure module and two external probes. The display can show up to 4 parameters, but can also display a trend graph and the min/max values of each channel. The C310 has two analog outputs, which can be extended by two more. Modbus and Ethernet communication are available as an option.

The Kimo CPE310 differential pressure transmitter is the successor of the CPE300. The transmitter can be flush mounted in a wall and can be calibrated using special connectors from the front. The CPE310 has an internal buzzer with acceptance and delay. Optionally, an external sensor for temperature and humidity, can be connected, the display then scrolls between the values​​. The CPE310-S has 3...

The Kimo VT210 thermo-anemo hygrometer is a very comprehensive instrument for measuring air velocity and flow in air ducts, or the intake and discharge grids thereof. There is a choice of fixed and telescopic heat wire and impeller sensors in various diameters. Furthermore, the hand meter can be extended with additional sensors for temperature and humidity. The VT210 is available in various pac...

The Kimo MP210 micromanometer is a very extensive instrument for measuring pressure difference and air velocity with pitot tube in air ducts, over filters and in clean rooms. There is a choice of different pressure modules with different measuring ranges. Furthermore, the hand meter can be extended with extra sensors for temperature and air speed. The MP210 is available in various packages incl...

The multifunctional Kimo HQ210 indoor climate meter can measure all parameters that are important for a pleasant indoor climate. For example, the HQ210 can measure temperature, relative humidity, carbon dioxide (CO2), carbon monoxide (CO) and omni-directional flow (draft). The HQ210 series is available in composite packages with a selection of sensors, or can be assembled according to your own...

The multifunctional Kimo TM210 portable thermometer measures temperatures and temperature differences and can be used to determine the U-value (heat coefficient). The TM210 series is available in composite packages with a selection of sensors, or can be assembled entirely according to your own wishes. The hand meter is supplied in a robust carrying case and the packages also with calibration of...

The multifunctional climate meter AMI310 is the all-rounder within Kimo's hand-held meter package. All possible sensors, such as temperature, relative humidity, carbon dioxide (CO2), carbon monoxide (CO), air speed, pressure difference and more can be connected to this. The AMI310 series is available in composite packages with a selection of sensors, or can be assembled according to your own wi...

The BEKA BA307E-SS series 4-20mA panel indicators are designed and certified for use in Ex e, Ex n, Ex p and Ex i systems. This "robust" indicators can withstand high impacts from the outside. Versatile certification makes these new indicators suitable to be safely installed in Ex e, Ex Ex n or p panel housing without additional mechanical protection, which leads to simplification of constructi...

The BA304G series is a compact version of the intrinsically safe Beka displays. This model can be exchanged with the old BA304B and BA304C series. The robust IP66 enclosure makes the display suitable for a very rough environment, such as the (petro) chemical industry, shipping and hydraulics.

The Dwyer SAH Smart Air Hood is a revolution in the field of balometers. The patented design ensures minimal resistance and the balometer is pre-calibrated for each type of grid. This makes the SAH the most reliable balometer on the market. The hood can easily be clamped between the floor and the ceiling with the included telescopic rod. The readout device communicates wirelessly with the hood...

The Dwyer CDTA series carbon dioxide meter combines three measurements in one compact housing. The CDTA measures CO2, humidity and temperature, but can also be used as a set point generator. Communication with a GBS or PLC is via Modbus®, or BACnet, which can be chosen in the field. To facilitate installation, the RS485 address can be set using dip switches. The CDTA uses a non-dispersive infra...

The BTT series temperature transmitters are ideal for measuring temperature in air ducts. Sensor lengths of up to 450 mm insertion are possible for duct mounting sensors. The plastic terminal box with fastening tabs makes the installation easier.

The Dwyer AVUL series measures air speed and volume flow in ventilation ducts. The AVUL works on a hot wire principle with special coating for a long life. There may be chosen for English or metric units. Furthermore, there are analogue outputs, but also versions for Smart Buildings with BACnet or Modbus communication.

The Dwyer RHP-D series has a combined temperature and humidity sensor for installation in air ducts. There can be selected from different precision and a performance with or without display. There are several outputs that allow the sensor to be read on any type of BMS.

The Dwyer BTT-E series is a simple space temperature transmitter for wall mounting. For the analogue output, you can choose between 4-20 mA and 0-10 V, so that the transmitters can be connected to any BMS.

The Dwyer BTT-R series is a temperature transmitter for outdoor mounting with radiation shield. The weather shelter ensures that the temperature measurement is not affected by direct sunlight. The BTT-R temperature transmitter has an analogue output for coupling to each building management system.

The Kimo GP500 series is a differential pressure generator for calibrating differential pressure meters. Due to compact size and convenient carrying case, the GP500 calibrator is also easy to use in the field.