All instrumentation

• USB temperatuur datalogger met LCD display
• Interne temperatuur sensor
• Nauwkeurigheid ± 0,5°C
• Levering inclusief WIndows software
• Ook leverbaar als set van 3 dataloggers
• Optioneel kalibratiecertificaat

Dwyer pitot tubes, series 160 are constructed from corrosion resistant stainless steel for a lifetime of service. No correction factors or calibration required. Various standard sizes are available for use in small and large ducts.

The Model AAFS air flow switch provides excellent sensitivity and reliability at a very reasonable price. Quality features include a rugged die cast body, stainless steel vane and SPDT snap switch. Unit is field adjustable from 400-1600 FPM. Mounting is fast and simple,with only two screws needed. Vane fits 6 inch or larger ducts.

Serves as pressure source to calibrate gages and transmitters or to set pressure switches. Use with manometer or other pressure standard. Generate pressures from a fraction of an inch w.c. to 72 psig (5 bar). Includes barbed fitting, tee connector and three 36? lengths of vinyl tubing.

This second generation "loop powered" indicating temperature transmitter provides a large, easy to read, digital temperature display plus accurate 4/20mA analogue and HART® digital outputs. The transmitter has a resistance thermometer, thermocouple, resistance or voltage input and may be configured using the internal push buttons or via HART® digital communication.

This second generation "loop powered" indicating temperature transmitter provides a large, easy to read, digital temperature display plus accurate 4/20mA analogue and HART® digital outputs. The transmitter has a resistance thermometer, thermocouple, resistance or voltage input and may be configured using the internal push buttons or via HART® digital communication

The general purpose ultrasonic level transmitter provides continuous level measurement up to 49.2" (1.25m) with a 4-20 mA signal output, and is configured via our free WebCal software. The embedded level controller can lower cost by replacing external control hardware. This non-contact liquid level sensor is ideally suited for corrosive, sticky or dirty liquids, and is widely selected for small...

The general purpose ultrasonic level transmitter provides continuous level measurement up to 9.8' (3m) with a 4-20 mA signal output, and is configured via our free WebCal software. The level sensor has 4 programmable relays with selectable hysteresis and fail-safe logic. The embedded level controller can lower cost by replacing external control hardware. This non-contact liquid level sensor is...

The general purpose ultrasonic level transmitter provides continuous level measurement up to 18.0' (5.5m) with a 4-20 mA signal output, and is configured via the free Webcal software. The level sensor has 4 programmable relays with selectable hysteresis and fail-safe logic. The embedded level controller can lower cost by replacing external control hardware. This non-contact liquid level sensor...

The magnetic, explosion proof, level switches of FineTek are custom made​​. Length, number of switching points and fitment can be made ​​according to customer specifications. The level switches consist of high quality materials and are quality controlled. The function of the switch, NO or NC, is easily set by the user. All switches are available with explosion proof ATEX certificate.

FineTek's side mounted float level sensor are manufactured specifically for horizontal mounting in a tank or vessel. The sensors have a marine approval or are intrinsically safe. Ideal for the process industry of maritime industry.

Rugged and reliable the Series L4 Flotect Level switch operates automatically to indicate tank level. Perfect for starting or stopping pumps, opening or closing valves, or actuate level alarm signals. Horizontal installation or optional top mount vertical installation. ATEX version available.

Model L8 Flotect Liquid Level Switch features a leak proof body and float constructed from tough, durable polyphenylene sulfide which has excellent chemical resistance. This compact and reliable control is designed to handle temperatures up to (100°C and pressures to 10 bar.

Micaflex MF-FD is a flow linear differential pressure transmitter specially developed for measuring air flow, together with all types of flow sensors with known flow constant, e.g. MFS flow sensor in ventilation ducts, chambers and rooms. They have an adjustable damping and a choice between a 0-10 V or 4-20 mA output. The flow transmitter is fitted with a 4-digit LED display for indicaiton of c...

The MFS flowsensor is a patented, self-averaging flow-sensor for all kinds of ventilation ducts. The average of air flow is measured across the whole length of the sensor. Gives a 2,5 times higher differential pressure than a Prandtl tube measuring. Easy to install in existing ducts. Lengths from 100 to 2500 mm.

Micatrone's flow sensor MFS-SS has been developed to meet the great demand for accurate air flow measurement in all types of air-handling systems. The MFS-SS is based on the principle of averaging the velocity profile over the height or the diameter of the duct.

Mechanical temperature switch for local mount in a weatherproof housing. The setpoint is adjustable from the exterior,

Mechanical temperature switch for remote mount in a weatherproof housing. The setpoint is adjustable from the exterior.

The SC2400 Series is a compact and inexpensive vibrating level switch by Finetek. The tuning fork is applicable in both liquids and bulk. The BSP threaded connection, transistor output and high temperature and pressure capacity of the SC2400 is an excellent solution for many installations. For more demanding apllications where the SC2400 is not sufficient, the SC series of FineTek offers many m...

The Finetek SC-Probe series works on the same principle as a tuning fork, but has the advantage that the sensor is in one piece. Thus, the medium can not sit between the sensor, which, in a traditional tuning fork can be the case. The SC2100 is the standard version that can be completely custom made​​, there is also an ATEX certified version, the SC1700.

The Series PAFS-1000 Lightweight Flow Sensor is ideal for sensing differential pressure in the inlet section of variable air volume terminal units and fan terminal units. Units can also be used to sense differential pressure at other locations in the main or branch duct systems.

ATEX approved flameproof temperature switch with remote sensor. The switch is available with 1 (T1X) or 2 (T2X) switch points, adjustable from exterior

The Dwyer TE-D series consists of highly priced temperature sensors for installation in air ducts. There are several outputs that allow the sensor to be read on any type of Building automation system.

TEK temperature sensors are designed for automatic ventilating systems to detect duct temperature. Sensors are mounted to the duct by means of an adjustable duct connection flange for optimal temperature detection