All instrumentation

• 2 externe sensor aansluitingen voor aansluiting van 2 temperatuur sensoren of 2 temperatuur/relatieve vocht sensoren
  
• 3 externe aansluitingen voor het doormelden van contacten van bijv. rookmelder, deurcontact, watermelder, spanningsmelder
• Zonder LCD-scherm
• Voorzien van RJ-45 aansluiting, te koppelen aan Ethernet

• Zonder LCD-scherm
• RJ-45 aansluiting, te koppelen aan Ethernet

• Zonder LCD-scherm
• Geïntegreerde temperatuur sensor
• RJ-45 aansluiting, te koppelen aan Ethernet

• Meet CO2 concentratie tot 50.000 ppm, O2 en temperatuur.
• Voorzien van relaisuitgang waarmee aangesloten apparaten aangestuurd kunnen worden zoals een CO2 generator of ventilatieventilator. 
• Ideaal voor brouwerijen, HVAC, metaal- en verlichtingsindustrie. 

• 2x Thermokoppel, 2x temperatuur/ RV
• 2x via pt1000 temperatuur sensor uit de TEP-10xD serie
• Bi-polaire signalen
• Opslag tot 1.000.000 meetwaarden
• Contact uitgang of lokale alarmering (akoestisch via zoemer of optisch via 3 LED’s)
• Helder LCD-scherm voor weergave van actuele meetwaarden
• Voeding via voedingsadapter of via o...

• Datalogging van 4 meetkanalen 
• Met sensor aansluitingen voor meting van temperatuur en relatieve luchtvochtigheid
• Geheugen tot 1.000.000 meetwaarden
• Contact uitgang of lokale alarmering (akoestisch via zoemer of optisch via 3 LED’s)
• Met helder LCD-scherm voor weergave van actuele meetwaarden
• Voeding via voedingsadapter of via oplaadbare...

• Beschikt over geïntegreerde sensor
• Met LCD-scherm
• Voorzien van RJ-45 aansluiting
• Te koppelen aan Ethernet

• Temperatuurbereik 0 tot 50°C
• Relatieve vochtigheidsbereik 10 tot 90% RV
• IP40
• Cinch connector

• 2-kanaals: interne temperatuur & 1x DC spanning
• Lange batterij levensduur
• Bereik -30 tot 60°C, -30 tot +30 Vss
• Inclusief 1-punts fabriekscertificaat

• Meten en registreren van temperatuur
• 1 interne sensor, 3 Thermokoppel en 1x PT1000
• Geschikt voor thermokoppels type B, J, K, N, S en T
• Bereik interne temperatuur sensor -30°C tot +70°C
• Bereik externe PT1000 temperatuur sensor -200°C tot +260°C
• Bereik externe thermokoppels afh. van thermokoppel (max 1.800...

These inexpensive manometers measure positive, negative and differential pressures. Dwyer Flex-Tube U-Tube Manometers combine the inherent accuracy of the simple "U" Tube with the durability of tough, long-lasting plastic construction. Series 1221 Manometer, the simplest, lowest cost basic U-gage. Series 1222 Manometer, alll the features of the 1221 plus magnetic clips. Series 1223 Manometer, t...

Dwyer pitot tubes, series 160 are constructed from corrosion resistant stainless steel for a lifetime of service. No correction factors or calibration required. Various standard sizes are available for use in small and large ducts.

Model 1950 explosion proof pressure pressure switch combines the best features of the popular1900 series with an integral explosion-proof and weatherproof housing, making it an exceptional value for either application. It is CE, UL and CSA listed, FM approved for use in Class I, Div 1, Groups C and D, Class II Groups E, F, and G and Class III hazardous atmospheres (NEMA 7 & 9), Raintight NEMA 3...

The Model 1950G Explosion-Proof Switch combines the best features of the popular Dwyer® Series 1950 Pressure Switch with the benefit of natural gas compatibility. Units are rain-tight for outdoor installations, And are ATEX approved CE ATEX II 2G Exd IIB+H2 T6. Adjustment to the set point of the switch can be made without disassembly of the housing.

Dwyer Magnehelic gage for high accuracy, guaranteed within 2% of full scale and for the wide choice of 81 models available to suit your needs precisely. Using Dwyer's simple, frictionless Magnehelic gage movement, it quickly indicates low air or noncorrosive gas pressures, either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer fl...

The Minihelic is a small differential pressure manometer, suitable for many of the same applications as the Magnehelic gage where the greater accuracy, sensitivity, and higher and lower differential pressure ranges of the Magnehelic gage are not required. It can safely operate at total pressures up to 200 kPa. With the housing molded from mineral and glass filled nylon and the lens molded from...

The series 3000MR Photohelic switch/gages combine the functions of a precise, highly repeatable differential pressure switch with a large easy-to-read analog pressure gage employing the durable, time-proven Magnehelic gage design. The Photohelic has 2 switch functions. Switch setting is easy to adjust with large external knobs on the gage face. Gage reading is unaffected by switch operation — w...

The Capsuhelic gage is designed to give fast, accurate indication of differential pressures. The gage may be used as a readout device when measuring flowing fluids, pressure drop across filters, liquid levels in storage tanks and many other applications involving pressure, vacuum or differential pressure.

Model 485B is a compact, hand-held instrument for measuring percentage of relative humidiy and temperature in °C or °F and also calculates dew point and wet bulb temperature. It will store up to 99 readings, ideal for technicians meeding to take multiple readings for later analyses.

The Model AAFS air flow switch provides excellent sensitivity and reliability at a very reasonable price. Quality features include a rugged die cast body, stainless steel vane and SPDT snap switch. Unit is field adjustable from 400-1600 FPM. Mounting is fast and simple,with only two screws needed. Vane fits 6 inch or larger ducts.

The Series 629C Differential Pressure Transmitter monitors differential pressure of air and compatible gases and liquids with 0.5% accuracy. The design employs dual pressure sensors converting pressure changes into a standard 4-20 mA output signal for two wire circuits. Small internal volume and minimum moving parts result in exceptional response and reliability.

Serves as pressure source to calibrate gages and transmitters or to set pressure switches. Use with manometer or other pressure standard. Generate pressures from a fraction of an inch w.c. to 72 psig (5 bar). Includes barbed fitting, tee connector and three 36? lengths of vinyl tubing.

The Series ADPS Adjustable Differential Pressure Switch is designed for pressure, vacuum, and differential pressures. The adjustment knob allows changes to the switching pressure to be made without a pressure gage. The ADPS is available with settings from 20 Pa up to 5000 Pa. The compact size, adjustment knob and low cost make the ADPS the perfect choice for HVAC applications.

The Dwyer series DM-2000 differential pressure transmitter senses the pressure of air and compatible gases and sends a standard 4-20 mA output signal. The DM-2000 housing is specifically designed to mount in the same diameter cutout as a standard Magnehelic gage. A wide range of models are available factory calibrated to specific ranges. Pressure connections are inherent to the glass filled pla...