Kimo Sauermann

The Kimo TH110 series is a relative humidity transmitter with or without display. The TH110 is ideal to use as humidity and temperature measurement in rooms and air ducts for connection to a building management system. The installation is very easy and the housing can be mounted in two parts making it ideal for installers.

The Kimo TH210 series is a relative humidity transmitter with or without display. The TH210 is ideal to use as temperature and humidity measurement in air ducts and rooms for connection to a building management system. The transmitter calculates the absolute humidity, dew point, wet and dry bulb temperature. For temperatures up to 180°C stainless steel sensors are available. There are also seve...

The Kimo CTV110 is a series of air velocity transmitters with or without display. The CTV110 is ideal to use as flow measurement in air ducts, fume hoods and laminar flow cabinets for connection to a building management system. The installation is very easy and the housing can be mounted in two parts making it ideal for installers.

The Kimo CTV210 is a series of air velocity transmitters with or without display. The CTV210 is ideal to use as flow measurement in air ducts, fume hoods and laminar flow cabinets for connection to a building management system. The transmitter can be carried out with a standard stainless steel probe, or a special omni-directional probe.

Kimo COST series is a carbon monoxide switch with indicator. The COST is ideal to use as security against carbon monoxide poisoning. The status LED indicates if an alarm level is exceeded and the audio-visual alarm warns at a high concentration of CO. The installation is very easy because the enclosure can be mounted in two parts, making it ideal for installers.

Kimo CO2ST series is a carbon dioxide switch with indicator. The CO2ST is ideal to use as an alarm for CO2. The status LED indicates if an alarm level is exceeded and the audio-visual alarm warns at a high concentration of CO2. The installation is very easy because the enclosure can be mounted in two parts, making it ideal for installers.

The Kimo LCC-S configuration software makes it very easy to program and configure Kimo class 110, 210 en 310 transmitters.

The new C310 series are multifonctional transmitters which can be extended by an internal pressure module and two external probes. The display can show up to 4 parameters, but can also display a trend graph and the min/max values of each channel. The C310 has two analog outputs, which can be extended by two more. Modbus and Ethernet communication are available as an option.

The C310 transmitters are extendable by SPI2 internal pressure modules. It is also possible to extend the C310 with relay output module C4R, which has four 3A relays. If the two standard analog outputs are not sufficient, they can be extended by two more with the O2S module.

The multifunctional C310 transmitters can be extended by two extranal probes. There are probes available for temperature, humidity, CO, CO2 and air velocity.

The Kimo CPE310 differential pressure transmitter is the successor of the CPE300. The transmitter can be flush mounted in a wall and can be calibrated using special connectors from the front. The CPE310 has an internal buzzer with acceptance and delay. Optionally, an external sensor for temperature and humidity, can be connected, the display then scrolls between the values​​. The CPE310-S has 3...

The Kimo VT210 thermo-anemo hygrometer is a very comprehensive instrument for measuring air velocity and flow in air ducts, or the intake and discharge grids thereof. There is a choice of fixed and telescopic heat wire and impeller sensors in various diameters. Furthermore, the hand meter can be extended with additional sensors for temperature and humidity. The VT210 is available in various pac...

The Kimo MP210 micromanometer is a very extensive instrument for measuring pressure difference and air velocity with pitot tube in air ducts, over filters and in clean rooms. There is a choice of different pressure modules with different measuring ranges. Furthermore, the hand meter can be extended with extra sensors for temperature and air speed. The MP210 is available in various packages incl...

The multifunctional Kimo HQ210 indoor climate meter can measure all parameters that are important for a pleasant indoor climate. For example, the HQ210 can measure temperature, relative humidity, carbon dioxide (CO2), carbon monoxide (CO) and omni-directional flow (draft). The HQ210 series is available in composite packages with a selection of sensors, or can be assembled according to your own...

The multifunctional Kimo TM210 portable thermometer measures temperatures and temperature differences and can be used to determine the U-value (heat coefficient). The TM210 series is available in composite packages with a selection of sensors, or can be assembled entirely according to your own wishes. The hand meter is supplied in a robust carrying case and the packages also with calibration of...

The multifunctional climate meter AMI310 is the all-rounder within Kimo's hand-held meter package. All possible sensors, such as temperature, relative humidity, carbon dioxide (CO2), carbon monoxide (CO), air speed, pressure difference and more can be connected to this. The AMI310 series is available in composite packages with a selection of sensors, or can be assembled according to your own wi...

The Kimo KCC320 is a data logger for measuring temperature, air humidity, barometric pressure and CO2 for indoor climate. The air quality data logger can register 4 parameters simultaneously and has a memory of 2 million measuring points. The KCC320 can be read out with the free Kilog Lite PC software, but also communicates via Bluetooth with an Android, or Apple IOS device. For advanced report...

The Kimo KP320 and KP321 are pressure differential data loggers for measuring underpressure, overpressure and filter monitoring in air handling systems. The differential pressure data logger has a range of 1000 or 10000 Pa and has a memory of 2 million measuring points. The KP320 can be read out with the free Kilog Lite PC software, but also communicates via Bluetooth with an Android, or Apple...

The Kimo KPA320 is a data logger for measuring temperature, air humidity and barometric pressure for indoor air quality. The air quality data logger can register 4 parameters simultaneously and has a memory of 2 million measuring points. The KPA320 can be read out with the free Kilog Lite PC software, but also communicates via Bluetooth with an Android, or Apple IOS device. For advanced reports...

The Kimo GP500 series is a differential pressure generator for calibrating differential pressure meters. Due to compact size and convenient carrying case, the GP500 calibrator is also easy to use in the field.

Kimo's GH500 series is a relative humidity calibrator with internal humidity generator. The GH500 is suitable for calibration of measuring equipment in a calibration laboratory or on the road.

The Debimo self-averaging flow sensors work on the same principle as a pitot tube. The advantage of this measurement principle is that non-laminar air flow can still be measured reliably. The Debimo sensors are made of aluminum and are available in a wide range of standard lengths. In addition, the sensors can also be customized.

The Kimo SF50 Series is a simple and reliable passive temperature sensor. The SF50 can be performed as PT100, PT1000 or NTC sensor. The sensors are tailor made so you can determine the sensor and cable length yourself.

The Kimo TB50 series is a temperature sensor with a robust housing. By default, the sensor has a PT100 output, but it can also be mounted by the CO-P in the head as a 4-20 mA transmitter. The optional thermowell allows assembly and disassembly without disturbing the process.