Search result for Eleven Bananas is an online reputation management company.

The multifunctional C310 transmitters can be extended by two extranal probes. There are probes available for temperature, humidity, CO, CO2 and air velocity.

The IP26 (current to pressure) transducer converts a 4–20mA electrical current signal to a proportional linear pneumatic output. The unique conversion technology provides a high level of accuracy and repeatability for the operation of actuated valves. A low mass control circuit provides consistent output in high vibration applications. This compact unit is housed in an explosion proof enclosure...

The CFS400A has been developed to meet the demanding custody transfer requirements of the oil and gas industry and is well suited to bulk measurement in many applications. The option of Super Duplex (UNS S32760) provides a maximum operating pressure of 180 barg. A high level of performance makes the CFS400A suitable for the bulk measurement of petroleum and oil as well as products like syrup, m...

The Schneider Electric RMU998 Remote Mounting Unit is the solution for series SRD998 and SRD991 valve actuators in extreme environments, such as very low or very high temperatures, high vibrations. The position of the actuator is determined by an external potentiometer in the RMU998, which passes the signal to the positioner mounted in another protected environment.

• 4 meetkanalen (2x miniDIN connector en 2x processignaal)
• Meting van temperatuur, temp. met RV, processignalen (4-20mA, 0-1V, 0-5V, 0-10V), pulssignalen en contacten.
• Met sensor aansluitingen voor meting van temperatuur
• Opslag tot 1.000.000 meetwaarden
• Inclusief 1-punts kalibratiecertificaat.
  

• 5 meetkanalen (2x miniDIN connector, 2x processignaal en een interne sensor)
• Meting van barometrische druk, temperatuur, temp. met RV, processignalen (4-20mA, 0-1V, 0-5V, 0-10V), pulssignalen en contacten.
• Met geïntegreerde sensoren of sensor aansluitingen voor meting van temperatuur
• Opslag tot 1.000.000 meetwaarden
• Alarmering via email, SMS (op bas...

• 5 meetkanalen (2x miniDIN connector, 2x processignaal en een interne CO2 sensor)
• Meting van koolstofdioxide CO2, temperatuur, temp. met relatieve luchtvochtigheid, processignalen (4-20mA, 0-1V, 0-5V, 0-10V), pulssignalen en contacten.
• Met geïntegreerde sensoren of sensor aansluitingen voor meting van temperatuur
• Opslag tot 1.000.000 meetwaarden
• In...

The Schneider Electric LR64 series consists of non-contact radar level meters for solids. The LR64 series can detect levels in solids from granules to stones.

The magnetic, explosion proof, level switches of FineTek are custom made​​. Length, number of switching points and fitment can be made ​​according to customer specifications. The level switches consist of high quality materials and are quality controlled. The function of the switch, NO or NC, is easily set by the user. All switches are available with explosion proof ATEX certificate.

The LU10 series ultrasonic level switch provides reliable level detection of chemical liquids, solvents, hydrocarbons and petroleum based fluids. Media examples include fuel, acetone and hydrochloric acid. The submersible polypropylene or PFA sensor can be mounted through the tank wall or in the tank as a high or low level alarm.

The Flowline LZ12 vibration level switch provides reliable liquid level detection of dirty liquids such as those with light to medium coating, scaling or foaming characteristics with a relay output. Media examples include wastewater, diluted caustic soda and light weight oil. For optimum performance, the liquid level switch automatically adjusts for coating build up, and if necessary, outputs a...

The all stainless steel multi float switches in the series UNS1000-VA are available with one to five switching points. These level switches for top mounting are custom made in any length up to one meter. With the standard 1 "BSP connection, these floats can be easily mounted into a socket on top of a tank.

The general purpose ultrasonic level transmitter provides continuous level measurement up to 49.2" (1.25m) with a 4-20 mA signal output, and is configured via our free WebCal software. The embedded level controller can lower cost by replacing external control hardware. This non-contact liquid level sensor is ideally suited for corrosive, sticky or dirty liquids, and is widely selected for small...

The general purpose ultrasonic level transmitter provides continuous level measurement up to 9.8' (3m) with a 4-20 mA signal output, and is configured via our free WebCal software. The level sensor has 4 programmable relays with selectable hysteresis and fail-safe logic. The embedded level controller can lower cost by replacing external control hardware. This non-contact liquid level sensor is...

The general purpose ultrasonic level transmitter provides continuous level measurement up to 18.0' (5.5m) with a 4-20 mA signal output, and is configured via the free Webcal software. The level sensor has 4 programmable relays with selectable hysteresis and fail-safe logic. The embedded level controller can lower cost by replacing external control hardware. This non-contact liquid level sensor...

The Flowline UG01 series reflective ultrasonic level transmitter offers continuous level measurement up to 3 meters with a 4-20 mA analog signal output and four relay contacts. The UG01 series is configured via the user-friendly WebCal software. The non-contact liquid level sensor is equipped with our patented Reflective Technology ™ that delivers reliable level measurement even with condensati...

These fourth generation intrinsically safe 4/20mA loop powered indicators have large high contrast displays with a very wide viewing angle. Operating over an extended temperature range they contain many standard features previously only available as options. Coated printed circuit boards plus extensive thermal and vibration testing provides maximum reliability supported by a three year guarantee.

The Kimo GP500 series is a differential pressure generator for calibrating differential pressure meters. Due to compact size and convenient carrying case, the GP500 calibrator is also easy to use in the field.

The Beka BR323 series consists of ATEX certified, explosion-proof (Ex d), loop-powered displays in aluminum or stainless steel housing. The configuration and calibration can be performed with a simple Windows software via a serial communication cable. Measurement units can be displayed on an alphanumeric five-digit display under the numeric display. The characters are entered via the configurat...

The BLS3000 is an electronic version of a traditional float switch. On the clear LCD display you can read the current level and with the built-in PNP contacts you can monitor a low or high level. In addition to the switching outputs, there are also versions with an analogue 4-20 mA, or 0-10 Volt output. The BLS3000 can be used as a float switch, but also as a level transmitter.

The CFS25 mass flow tubes can be combined with a CFT51 Coriolis flow transmitter to form a Coriolis mass flow and density meter. The principle of Coriolis acceleration is used, with which real mass flow measurements of liquids can be carried out directly, without requiring external temperature, pressure or density measurements. The CFS25 series consists of flow tubes with a double pad. The liqu...

• Web-based temperatuur sensor
• Met LCD-scherm
  
• Voorzien van RJ-45 aansluiting, te koppelen aan Ethernet

• Web-based temperatuur sensor
• Met LCD-scherm
• RJ-45 aansluiting, te koppelen aan Ethernet
  
• Power over Ethernet

• Web-based temperatuur/relatieve vochtigheid sensor
• Met LCD-scherm
• Voorzien van RJ-45 aansluiting, te koppelen aan Ethernet

• Web-based temperatuur/ RV sensor
• Met LCD-scherm
• RJ-45 aansluiting, te koppelen aan Ethernet
• Power over Ethernet

• Complete oplossing om op een kosteneffectieve wijze het energieverbruik in kaart te brengen.
• Geschikt voor 1- en 3-fase metingen.
• Toepasbaar tot max. 600 Volt spanning (VAC/VDC) en max. 6000 AC stroom.
• Wordt via meetspanning gevoed, geen additionele voedingsbron of batterijen benodigd.

Model 485B is a compact, hand-held instrument for measuring percentage of relative humidiy and temperature in °C or °F and also calculates dew point and wet bulb temperature. It will store up to 99 readings, ideal for technicians meeding to take multiple readings for later analyses.

The KT20 Series Button Data Loggers from Kimo are very compact and sharply priced. The button size data loggers can be used to record temperatures during transport, or storage.

The Kimo KP320 and KP321 are pressure differential data loggers for measuring underpressure, overpressure and filter monitoring in air handling systems. The differential pressure data logger has a range of 1000 or 10000 Pa and has a memory of 2 million measuring points. The KP320 can be read out with the free Kilog Lite PC software, but also communicates via Bluetooth with an Android, or Apple...

The Kimo KPA320 is a data logger for measuring temperature, air humidity and barometric pressure for indoor air quality. The air quality data logger can register 4 parameters simultaneously and has a memory of 2 million measuring points. The KPA320 can be read out with the free Kilog Lite PC software, but also communicates via Bluetooth with an Android, or Apple IOS device. For advanced reports...

Series 490A Digital Manometers are versatile, hand-held, battery operated manometers available in several basic ranges for positive or positive differential pressure measurement and can tolerate most liquid media compatible with 316LSS. A memory function allows storage of up to 40 readings.

• Meten en registreren van temperatuur, RV en dauwpunt
• Bereik temp int: -30°C tot +70°C
• Nauwkeurigheid: ± 0,4°C
• Bereik RV int: 0 tot 100% RV
• Nauwkeurigheid: ± 1,8% R.V
• Bereik temp RV ext: afhankelijk van toegepaste probe
• Li-ion batterij 2x 2400mAh
• Incl. fabriekscertificaat en 3 ja...

• Datalogging van 4 meetkanalen 
• Met sensor aansluitingen voor meting van temperatuur en relatieve luchtvochtigheid
• Geheugen tot 1.000.000 meetwaarden
• Contact uitgang of lokale alarmering (akoestisch via zoemer of optisch via 3 LED’s)
• Met helder LCD-scherm voor weergave van actuele meetwaarden
• Voeding via voedingsadapter of via oplaadbare...

Mechanical temperature switch for local mount in a weatherproof housing. The setpoint is adjustable from the exterior,

Mechanical temperature switch for remote mount in a weatherproof housing. The setpoint is adjustable from the exterior.

The Dwyer TE-E series consists of very competitively priced temperature sensors for mounting in walls on the wall. There are several outputs for each type of BMS possible

The BTS3000 electronic temperature switch series offers a compact, reliable and flexible temperature measurement. The BTS3000 can be used as a thermostat, but can also optionally be equipped with an analog output, so that it also functions as a temperature transmitter. The temperature sensors can be put together according to their wishes. Different measuring ranges, process connection and plug-...

The Dwyer DFS series serves as frost protection for air treatment cabinets. The DFS series thermostat is available in manual or automatic reset. You can choose from a cappilar length of 3 or 6 meters.

The THIR50 series from Kimo is a temperature sensor with a DIN43650 connection. The sensor has a PT100 output. The optional thermowell enables assembly and disassembly without disturbing the process.

The series 3000MR Photohelic switch/gages combine the functions of a precise, highly repeatable differential pressure switch with a large easy-to-read analog pressure gage employing the durable, time-proven Magnehelic gage design. The Photohelic has 2 switch functions. Switch setting is easy to adjust with large external knobs on the gage face. Gage reading is unaffected by switch operation — w...

The Series ADPS Adjustable Differential Pressure Switch is designed for pressure, vacuum, and differential pressures. The adjustment knob allows changes to the switching pressure to be made without a pressure gage. The ADPS is available with settings from 20 Pa up to 5000 Pa. The compact size, adjustment knob and low cost make the ADPS the perfect choice for HVAC applications.

Bourdon tube pressure switches with direct-acting pressure sensor and the snap-acting micro switch provide very high accuracy and long life span. Main features are that the wetted parts are welded, direct acting, no friction and high accuracy Available with 1 (B1T) or 2 (B2T)setpoints. Measuring ranges from 5,3 to 496 bar. Main Applications : pump control, die-casting machines, press control,...

Bourdon tube explosion proof pressure switches with direct-acting pressure sensor and the snap-acting microswitch provide very high accuracy and long life span. Ranges available from 5 to 950 bar, with 1 (B1X) or 2 (B2X) separate setpoints.

Metal diaphragm pressure switches with direct-acting pressure sensor and the snap-acting micro switch provide very high accuracy and long life span. Main features are that the wetted parts are welded, direct acting, no friction and high accuracy. Available with 1 (D1T) or 2 (D2T)setpoints. Measuring ranges from -0.006 ... -1 bar up to 0.005 ... 10.3 bar. Main applications are petrochemicals i...

Mechanical pressure switch with stainless steel diaphragm for pressure control in explosion-proof areas. Adjustment ranges from 1 mbar up to 10 bar. Available with 1 contact (D1X) or 2 contacts (D2X).

Pressure switch E1H provide high accuracy, long life span and high proof pressure due to their design diaphragm seal piston. It can be equipped with manual reset for alarm functions.

Explosion-proof, heavy duty, industrial pressure switch which provides sensitivity to differential pressure as low as 25 mbar up to 14 bar with a max. static pressure of 100 bar. This unit has a standard aluminium pressure chamber but is also available in 316 stainless steel. Approvals : UL, CSA, CE and ATEX.

The MP Mini-Photohelic differential pressure switch/gage combines the time proven Minihelic II differential pressure gage with two SPDT switching setpoints. The Mini-Photohelic gage is designed to measure and control positive, negative, or differential pressures consisting of non-combustible and non-corrosive gases. Gage reading is independent of switch operation. This extremely compact switch...